Choose a fabric that lets sound through to the core, that its maker has tested over a panel core with little or no loss of absorption, that meets contract durability guidelines for wrapped panels, and that comes with fire and PFAS documents for the way it will be used. Where chairs, bags and hands rub the panels, borrow the tougher upholstery abrasion levels. Clean by removing dust first, then treat spots by type: clear water and a little detergent for water-borne stains, and a spot remover applied to a cloth, never poured on the fabric, for oily ones, always following the fabric maker’s own instructions.
This guide is for designers, specifiers, facility managers and hospitality operators. It covers plain panel fabrics. Printed faces are covered in acoustic art panels, the core behind the fabric in PET felt, mineral wool or fiberglass, and the fire code routes in what a Class A fire rating does and does not cover.
What the fabric has to do on a panel
Panel fabric has three jobs: let sound reach the absorbing core, look right for years, and survive the cleaning the room needs. The first job rules out closed or coated faces; the other two decide everything else.
A wrapped panel absorbs sound in its porous core. The fabric sits in front, so any sound it reflects never reaches the core. Fabric makers handle this by testing fabrics on a core rather than alone. The Designtex acoustic materials guide explains that for its panel fabrics “the material is placed on a fiberglass board to simulate a wrapped panel, and the full construction is tested,” so the result “measures the combined absorption of the fabric and the board, not the fabric alone.”
Fiber content
Polyester dominates. The Acoustical Surfaces cleaning sheet opens by noting that “most acoustical panel fabric is produced from 100% polyester fiber,” and the VA master specification’s fabric options are all polyester or a perforated vinyl. Whatever the fiber, ask for the same documents: an acoustic report on a core, a fire report, a PFAS statement and cleaning instructions. Fiber content alone tells you little about any of them.
The “NRC difference” approach
KnollTextiles describes a two-step version in its acoustical fabrics sheet: it tests the panel alone, then the panel covered with the fabric, and reports the change in NRC. It calls fabrics “acoustically neutral” when that difference falls between -0.25 and 0.25, and adds that “it may be necessary to review the full report showing the absorption at all frequencies tested.” That last sentence matters more than the range.
When there is no fabric at all
Felt panels have no separate face: the felt is both the absorber and the surface. Their care and fire documents belong to the felt itself, which is covered in PET felt, mineral wool or fiberglass. The rest of this guide applies to fabric-wrapped panels and printed fabric faces.
A quick screen before any report
Hold the fabric to your mouth and blow. If air passes easily, the face is open; if it does not, the fabric is probably closed or coated. This screen, and the airflow resistance test behind it, are explained in more detail in our article on printed acoustic panels. It can reject a sealed sample. It cannot approve a fabric; only band data can.
Reading a fabric’s acoustic report
The most useful fabric report tests the same core twice, with and without the fabric, and lets you see whether the difference is larger than the test’s own spread. A public example shows how small a well-chosen fabric’s effect can be.
The report is ETS-Lindgren Acoustic Research Laboratory report ARL-SA6957/ARL-SA6958, dated December 19, 2016, published by the fabric’s maker. The lab, NVLAP-accredited for the procedure under lab code 100286-0, tested a 2 in fiberglass board of 3.0 pounds per cubic foot laid flat (Type A, ASTM C423-09a, E795-05(2012)), first bare and then covered with an unbacked 100 percent polyester fabric quoted at 9.42 oz per yard on a 60 in wide roll. Both specimens covered 72 sq ft.
What changed when the fabric went on
| Band | Board alone | Board with fabric | Change | Between-lab reproducibility (plus or minus) |
|---|---|---|---|---|
| 125 Hz | 0.25 | 0.31 | +0.06 | 0.22 |
| 250 Hz | 0.75 | 0.86 | +0.11 | 0.15 |
| 500 Hz | 1.14 | 1.21 | +0.07 | 0.14 |
| 1,000 Hz | 1.10 | 1.11 | +0.01 | 0.12 |
| 2,000 Hz | 1.00 | 1.01 | +0.01 | 0.13 |
| 4,000 Hz | 0.99 | 0.99 | 0.00 | 0.16 |
| NRC | 1.00 | 1.05 | +0.05 | |
| SAA | 1.00 | 1.05 | +0.05 | 0.08 |
The fabric did not reduce absorption by more than 0.01 in any band of the full one-third octave table. The small gains sit inside the report’s own reproducibility figures, which the lab says are based on a round robin among 16 laboratories. The honest reading is “no measurable loss,” not “the fabric adds absorption.”
What to check in a report like this
- Both runs present. A fabric report with only the covered panel cannot show what the fabric changed.
- The core named. Here it was a 2 in, 3 pcf fiberglass board. A different core, or a thinner one, could respond differently.
- The fabric described consistently. The cover page describes the fabric as 100 percent polyester; the chart pages label it with a different fiber name. When labels disagree inside a report, ask the maker which is correct before you rely on it.
- The finish and backing. This fabric was tested unbacked. A backed or coated version of the same pattern is a different specimen.
- The repeatability columns. If a report gives them, use them. A 0.05 change in NRC is not a reason to choose one fabric over another.
Fabric over felt or over thin cores
Fabric makers usually test over a fiberglass board, as both the report above and the Designtex guide describe. If your panels use a different core, such as PET felt or a thin board, the fabric’s effect may not be the same, because the share of absorption happening near the face may change with the core. Ask whether the maker has data on a core like yours, and if not, treat the fiberglass-board result as a good sign rather than proof of the same outcome.
Example (fictional). A designer shortlists two fabrics for a hotel meeting room. Fabric A’s maker supplies a report like the one above: same core with and without the fabric, NRC 1.00 and 1.05. Fabric B’s maker supplies a one-page sheet saying “NRC 0.95 on a 2 in panel,” with no bare-panel run, no mounting and no band table. The designer cannot tell whether Fabric B costs any absorption, so she asks for the full report before sampling it. Both fabrics are invented for this example.
Backings, coatings and facings: what a closed face does
A closed face shifts absorption away from the high frequencies, and the single-number rating can hide it. Ask for band data on the exact fabric with its backing, finish or print, not on a sister fabric.
No public report we found tests the same panel fabric with and without a coating. A mineral fiber maker’s data shows the effect clearly with a different kind of closed face. The Owens Corning 700 Series data sheet lists the same 1 in, 3 pcf fiberglass board unfaced and with two factory facings, all tested to ASTM C423 in Type A mounting.
What the figure shows
Unfaced, the board reads 0.97 at 2,000 Hz and 0.94 at 4,000 Hz. With the foil and kraft facing it reads 0.47 and 0.21; with the film jacket, 0.38 and 0.15. At 250 Hz the faced versions read higher, 0.71 and 0.81 against 0.26. The NRC barely moves: 0.70, 0.70 and 0.65. A reviewer who checked only the single number would miss that the closed faces gave up most of the high-frequency absorption that makes speech crisp in a room.
What this means for choosing a fabric
If a fabric maker can show band data with and without the fabric, you can see any high-frequency loss directly. If the maker offers only a single number, you cannot, because a closed face can trade high-frequency absorption for low-frequency absorption and leave the NRC where it was. Between two fabrics you like equally, choose the one with the band data.
Where closed faces come from on a fabric
- Backings. Some upholstery and wallcovering fabrics carry a latex, acrylic or paper backing. The Knoll list marks some fabrics as “unbacked,” which suggests backed versions of those patterns exist. Specify the unbacked version for wrapped panels, or ask for test data on the backed one.
- Stain and water repellent finishes. These are applied to the face. Ask whether the tested specimen carried the same finish.
- Vinyls. The VA master specification for sound-absorbing wall units allows a “perforated vinyl covering with fabric backing.” The perforation is what lets sound through; ask for data on the exact perforated product.
- Prints. Ink and pretreatments add material to the face. See acoustic art panels for how to judge them.
Stretch, wrinkles and the frame
A fabric also has to wrap well. The VA master specification asks for fabric “stretched free of wrinkles and then bonded to the edges and back or bonded directly to the panel face, edges, and back.” Ask the panel maker to wrap a sample corner in the chosen fabric before you approve it.
Durability: what to specify
Contract textile guidelines give wrapped-panel fabrics minimums for breaking strength, crocking and lightfastness, but no abrasion level. Where panels sit at chair-back or hand height, borrow the upholstery abrasion guidelines.
The Association for Contract Textiles’ voluntary guidelines for woven indoor fabrics, dated February 2025, set different tests by application. For “wrapped panels and upholstered walls” they ask for:
| Property | Test | ACT guideline for wrapped panels |
|---|---|---|
| Breaking strength | ASTM D5034 (grab test) | 35 lb minimum in warp and weft |
| Wet and dry crocking | AATCC 8 | Grade 3 minimum, dry and wet |
| Colorfastness to light | AATCC 16.2 Option 1 or 16.3 Option 3 | Grade 4 minimum at 40 hours |
| Flammability | ASTM E84, unadhered mounting | Class A or Class 1 |
Crocking is dye rubbing off onto another surface, which matters for light clothing brushing against a dark panel. ACT notes that “there is no direct correlation between the numbers of testing hours and hours of service in the field” for lightfastness, so treat 40 hours as a screen for sunny rooms, not a lifespan.
Abrasion: borrow from upholstery where panels get rubbed
ACT sets abrasion levels only for upholstery: 15,000 double rubs (ASTM D4157, Wyzenbeek) or 20,000 cycles (ASTM D4966, Martindale) for low-traffic private spaces, and 30,000 double rubs or 40,000 cycles for high-traffic public spaces. A wall panel behind a banquette in a restaurant, or along a corridor where bags swing, gets rubbed like upholstery. For those panels, specifying the low-traffic upholstery level is a reasonable editorial choice, and the high-traffic level for the worst spots.
ACT is candid about the limits of these numbers. It says results of multiple abrasion tests on some fabric structures “may vary significantly,” by “as much as 60 percent or more,” and that “there is no correlation between Wyzenbeek and Martindale results.” Compare fabrics on the same method, and do not treat a very high double-rub count as a promise.
Pilling
ACT’s guideline for upholstery includes pilling, Class 3 minimum by ASTM D3511 (brush pill) or ASTM D4970 (Martindale), but none for wrapped panels. ACT describes pilling as “the formation of fuzzy balls of fiber on the surface of a fabric,” notes that it does not affect durability or function, and says lab tests “cannot predict field performance” because they do not account for care, misuse and environment. For panels that will be rubbed, ask for the upholstery pilling result too.
Weight and strength in public specifications
The VA master specification gives a fuller picture for one building type. Its fabric options include a needle-punched polyester of at least 11 oz per linear yard and a two-ply woven polyester of at least 15 oz per linear yard, each with minimum tear and tensile strengths, and a lightfastness of “not less than 40 hours” under AATCC 16. For health care areas it adds fabric that is “flame resistant, stain resistant, and antimicrobial” and “cleanable with water or solvent based cleaning agents or diluted household bleach.”
Fire documents for the fabric and for the wrapped panel
A fabric’s fire report and a panel’s fire report are different documents. The contract textile guideline asks for an E84 test of the fabric alone; the building code asks for evidence on the finished panel, tested the way it is installed.
ACT’s guideline for wrapped panels is ASTM E84 in an “unadhered” mounting, Class A or Class 1, and for direct-glue wallcoverings and adhered panels E84 in an “adhered” mounting. That tells you how the fabric behaves in the tunnel. It is not the whole answer for a building.
Why the unadhered test matters for wrapped panels
A wrapped panel’s fabric is stretched over a core, not glued flat to a board. ASTM E84 warns in section 1.4 that supporting materials under a specimen can lower its flame spread index, and that results “do not necessarily relate” to the same material without that support. An adhered result is the right document for a fabric glued to a wall; for a wrapped panel, ask for the unadhered result that the ACT guideline names, and then for the panel itself.
What the code asks for
The IBC, in the 2021 text as published in the Seattle Building Code, Chapter 8, requires textile wall coverings to be “tested in the manner intended for use, using the product-mounting system, including adhesive,” and then to pass NFPA 286, pass NFPA 265 Method B, or reach Class A on E84 in a building with automatic sprinklers. Whether a factory-wrapped panel is reviewed as a textile wall covering is a question for the building official. Our article on acoustic panel fire ratings walks through the routes, the occupancy classes and the edition differences.
What to ask the fabric maker
- The E84 report for the fabric, with the mounting (adhered or unadhered) and what it was tested over.
- Any room-corner report (NFPA 265 or NFPA 286) that includes the fabric.
- Whether the fabric’s flame resistance comes from the fiber itself or from a topical finish, and whether cleaning affects it.
- For printed or coated versions, whether the fire report covers the fabric as printed or coated.
Then ask the panel maker for the report on the complete panel. Materials and safety describes how we cite fabric and core reports for our own planning work.
Finishes, PFAS and what to ask a fabric maker
Stain and water repellent finishes have often relied on PFAS chemistry, and California now restricts PFAS in many textile articles. Ask every fabric maker for a dated PFAS statement and a description of any finish, rather than a general “treated” label.
California AB 1817
California’s AB 1817, approved by the Governor on September 29, 2022, prohibits making, distributing or selling new “textile articles” that contain regulated PFAS from January 1, 2025. The law defines regulated PFAS to include their presence at or above 100 parts per million of total organic fluorine from January 1, 2025, and 50 parts per million from January 1, 2027. It defines textile articles as goods “customarily and ordinarily used in households and businesses,” including “draperies,” “furnishings” and “upholstery,” and it requires manufacturers to give sellers a certificate of compliance. The live legislature page blocked automated access, so we read the official bill text in an archived 2026 copy.
Whether a particular acoustic panel fabric is a textile article under that law is a legal question, and we do not answer it for you. The practical step is the same either way: ask for the maker’s certificate or PFAS statement, with its date, and keep it with the project records.
A PFAS request you can send
A short written request gets clearer answers than a phone call. For example: “For fabric [name, color], please send (1) a dated statement or certificate of compliance on regulated PFAS, with the test method or basis, (2) the name of any stain, water or soil repellent finish, (3) any flame-retardant finish, and (4) any antimicrobial finish. Please confirm whether the acoustic and fire test specimens carried the same finishes.” Keep the replies with the project records and ask again if the fabric is reordered later.
Other finishes to ask about
The public excerpt of BuildingGreen’s acoustic panel product guide lists “stain and dirt repellents made from per- and polyfluoroalkyl substances (PFAS),” flame retardants, formaldehyde and PVC among things to “watch out for.” Antimicrobial finishes, which the VA asks for in health care areas, are another category to document by name. A finish described only as “protected” or “treated” is not a document.
Finishes and cleaning go together
A repellent finish changes how a stain behaves and how the fabric should be cleaned. So does a flame-retardant finish, if the fabric relies on one. That is why the cleaning method should come from the fabric maker’s instructions for the exact fabric and finish, not from a general guide, including this one.
Choosing fabric by room
Rooms differ in what touches the panels, what gets spilled on them and how often they are cleaned. Match the fabric’s tested properties to the room.
| Room | What happens to the panels | Fabric priorities |
|---|---|---|
| Restaurant dining room | Chair backs, bags, coats, splashes near tables | Upholstery-level abrasion at seat height, cleanable by both water and solvent methods, mid-tone colors that hide wear |
| Cafe or bar | Steam, grease in the air near the bar, hands | Panels placed away from the espresso machine and fryer, a fabric with clear spot-cleaning instructions |
| Office or meeting room | Occasional contact, sunlight from windows | Lightfastness for sunny walls, crocking grade for light clothing, a neutral face |
| Health care waiting area | Frequent cleaning | Fabric cleanable with water, solvent or diluted bleach, as the VA requires for health care |
| Home or home office | Little contact, sun, pets | Lightfastness for sunny walls and a color you will live with |
| School corridor | Bags, hands, pins | High-traffic upholstery abrasion and breaking strength above the panel minimum |
Panel fabric versus upholstery fabric
The ACT guidelines treat the two as different applications. Upholstery fabrics are tested for abrasion, pilling and seam slippage, need 50 lb breaking strength against 35 lb for wrapped panels, and use California Technical Bulletin 117-2013 for flammability rather than ASTM E84. So a chair fabric chosen to match the walls may not carry the fire report a wall panel needs, and a panel fabric may not carry the wear data a banquette back needs. If one fabric must do both jobs, ask for both sets of results.
Samples and approvals
Public specifications set useful sample sizes. The VA asks for fabric samples 18 in in size, “four (4) each, full width of mill run for each color specified,” and the federal UFGS template asks for finished swatches at least 18 by 24 in, three samples of each color range. Review samples on the wall they will cover, in daylight and at night under the room’s own lights, since color can read differently on a sample board than on a wall. Approve one sample and keep it as the reference for the rest of the order.
Example (fictional). An office fits out a corner meeting room with two glass walls facing south-west. The designer’s first choice is a deep blue fabric with no lightfastness data. She asks the maker for its AATCC 16 result and gets Grade 4 at 40 hours, the ACT minimum, then chooses a second fabric reported at a higher exposure for the two panels that face the windows. The room, the fabrics and their results are invented for this example.
Color and texture choices that help
Mid-tone and heathered fabrics tend to show dust and small marks less than very light or very dark solids. Textured weaves hide minor wear. In a restaurant, a darker fabric below table height and a lighter one above is a simple way to keep the look without fighting every scuff. For where panels belong in a loud dining room in the first place, see how to make a restaurant quieter, and for cafes, coffee shop acoustics.
How to clean acoustic panel fabric
Start with dust, then deal with spots quickly and by type, using as little liquid as possible. The method below follows a panel maker’s published cleaning sheet; where it differs from your fabric maker’s instructions, follow the fabric maker.
Routine dusting
Dust settles on the top edges and faces of panels. Remove it with a soft brush attachment on a vacuum at low suction, working from top to bottom, on the same schedule as other high cleaning. The VA template’s cleaning clause simply says to clean panels “according to manufacturer’s written instructions,” which is the right default.
Spot cleaning, step by step
The Acoustical Surfaces cleaning sheet notes that “most acoustical panel fabric is produced from 100% polyester fiber” and sets out this procedure:
- Act quickly. “Primary consideration in spot removal is prompt attention.”
- Identify the stain before treating it.
- Lift what you can. Blot liquids with a clean tissue or cloth, without rubbing or pressing soil into the fabric; scrape semi-solids off with a knife or spoon, then blot.
- Work from the edges toward the center to keep the spot from spreading.
- Water-borne stains: sponge with clear water (cold water only for blood). If the stain stays, sponge or brush softly with water and detergent, then rinse with clear water. “During treatment, apply solutions sparingly.”
- Oil-borne stains: sponge with a spot remover or solvent. “Never apply solvent directly to fabric. Apply with clean cloth or sponge.” Remove excess with a blotter.
- Combination stains: clear water first, then a mild detergent solution, then a spot remover if needed.
Two habits make this safer on any panel. Test the method on a hidden spot or a sample first, and keep liquid to a minimum, since anything that soaks through the face reaches the core and the adhesive behind it.
What not to do
- Do not spray or pour any cleaner directly onto the panel.
- Do not soak the fabric; apply solutions sparingly, as the sheet says.
- Do not scrub hard or use stiff brushes on woven faces.
- Do not use bleach unless the fabric maker allows it, as health care fabrics may.
- Do not try a new product on a visible panel first.
- Do not use solvents from an old cleaning sheet without checking them against current rules, as explained below.
Who should clean
Staff can handle routine dusting and fresh spills with the method above. For stains that do not lift, large areas or fabrics with special finishes, call a professional upholstery cleaner and give them the fabric maker’s instructions before they start. Ask the panel maker, too, before anyone wets a panel.
After the clean
Let the spot dry fully before judging it, and keep the room ventilated while it does. The Acoustical Surfaces sheet says that with proper technique the fabric “will be readily cleansed of stains and soil without a resultant ‘ring’ forming”. If a ring does appear, check the technique against the sheet: liquid applied sparingly, and work from the edges toward the center. Once dry, brush the area lightly in the direction of the weave so the cleaned patch matches its surroundings.
Old solvent lists
Older cleaning sheets, including the one above, list organic solvents such as trichloroethylene and carbon tetrachloride. Do not use them. The US EPA issued a final rule in December 2024 that prohibits most uses of trichloroethylene, including in all consumer products (EPA on TCE), and says of carbon tetrachloride that “there are no consumer uses of this chemical” (EPA on carbon tetrachloride). Use a current spot remover that the fabric maker approves.
Vinyl faces
The same sheet treats vinyls separately: rub lightly with a moistened cloth or soft brush and a mild soap or non-abrasive cleanser, rinse with clean water, and towel dry. It warns that strong organic solvents such as ketones and harsh abrasive cleaners “will cause dulling, discoloration, or softening of the vinyl.”
Hospitality stains and a cleaning plan
In restaurants and cafes, most stains fall into the sheet’s three types, and a short written plan stops staff from reaching for the wrong product. Put the plan in the closeout binder with the fabric maker’s instructions.
Matching common stains to the method
| Stain | Treat as | First step |
|---|---|---|
| Coffee, tea, soda, juice | Water-borne | Blot, then clear water |
| Red wine | Water-borne | Blot at once, then clear water, then water and detergent |
| Blood | Water-borne | Cold water only |
| Cooking grease, salad oil | Oil-borne | Spot remover on a cloth, never on the fabric |
| Lipstick, ink, sauces with oil | Combination | Clear water, then mild detergent, then spot remover |
| Dust and kitchen film on top edges | Dust | Brush attachment, then spot-treat what remains |
A one-page cleaning card
Keep the card short enough to tape inside a supply closet door: the fabric name and color, the maker’s cleaning instructions in a few lines, the approved products by name, what never to use, the dusting schedule, and who to call when a stain will not lift. That way the card, not one person, carries the knowledge.
Prevention beats cleaning
Placement does more than any cleaner. Keep fabric panels out of the air directly above fryers, grills and espresso machines, and above seat backs where chairs are pushed against the wall, use a tougher fabric or a protective rail. Our restaurant and cafe articles cover where panels earn their place in those rooms.
Example (fictional). Juniper Street Kitchen (fictional) has 14 fabric wall panels at seated ear height along two banquettes. The manager writes a one-page plan: brush the top edges every two weeks; blot spills the same day; water and detergent for drinks, spot remover on a cloth for grease; never spray anything directly onto a panel; log any stain that does not lift and call the fabricator. After six months two panels behind the busiest table show wear, and they are swapped for the spares kept from the original order. The restaurant and its plan are invented for this example.
When to re-cover or replace a panel
Replace or re-cover a panel when a stain will not lift, when the face has faded or worn through, or when the fabric has lost its shape on the frame. Keeping spare panels or fabric from the original run makes that simple.
Signs it is time
- A stain that has survived two rounds of the correct method.
- Fading on a sunlit wall that makes one panel read differently from its neighbors.
- Pilling, snags or bare spots at chair-back height.
- Fabric that has sagged or rippled, often after a panel got wet.
Keep records from day one
Record the fabric maker, pattern, color, finish and production lot for every panel type, and file the cleaning instructions, PFAS statement and fire reports with them. When a panel needs attention in three years, those records turn a guess into a reorder.
Re-covering versus replacing
Some panels can be re-covered by their maker, depending on how the fabric is attached to the frame or edge. Others are easier to replace whole. Either way, the new fabric should come from the same production run as the rest of the room, or the difference will show. That is why a specification should ask for extra stock, as set out in specifying acoustic panels, and why custom fabrication records the fabric and color for every panel.
A checklist before you approve a fabric
- Breath test on a sample: air passes easily.
- An acoustic report on a core with and without the fabric, with band data, for the exact fabric, backing and finish.
- ACT-level breaking strength, crocking and lightfastness for wrapped panels, and upholstery-level abrasion where panels are rubbed.
- An E84 report for the fabric with the mounting named, any room-corner report, and the panel maker’s report for the finished panel.
- A dated PFAS statement or certificate of compliance, and the name of any finish.
- The fabric maker’s cleaning instructions for that fabric and finish, filed with the closeout documents.
- Spare panels or fabric from the same run.
Fibson Acoustics designs and makes fabric-wrapped panels to order and has not yet tested its finished panels; its proposals name the fabric maker’s reports, as described on materials and safety. The fabric-wrapped wall panels page shows the panel types, and you can ask for fabric samples through the contact page.
