Fibson homePlan my room
Menu

Acoustic calculators, worksheets and checklists

Calculators, worksheets and checklists for planning a quieter room.

Plan my room
A blank felt clipboard with a tape measure and a short pencil lying beside it.
Runs
In your browser; nothing you type is sent to us
Gives
Planning estimates with the formula shown
Example values
A fictional 60-seat dining room
Next step
Send your numbers with Plan my room

These tools do the same arithmetic we use when we plan a room, set out so you can try it on your own. Each one shows its formula and its assumptions, and each starts with the numbers from our example room, a fictional 60-seat dining room that is not a Fibson project, so you can see a complete answer before you replace it with yours.

What they are for

  • Calculators answer one question each: how long a room rings, how much absorption it needs, what an NRC means, how sound levels add up, whether a panel fits the ADA protrusion rules, and more.
  • Worksheets collect what we need to know about a room: its measurements, the photos to take and the finish of every surface. You can download them as CSV or print them.
  • Checklists cover what to look at in a restaurant, an open office or a meeting room, and which documents to ask any panel supplier for before you order.
  • The acoustics glossary defines the terms these pages use, with the standard behind each one where there is one.

Nothing leaves your browser

What you type is calculated in your browser and is not sent to us or stored; it is gone when you close the tab. If you want us to see your numbers, download the CSV or print the page and send it to us yourself.

Estimates, not measurements

The calculators use the Sabine formula and published absorption data, the same starting point as our room acoustic assessment. They assume sound spreads evenly through the room, which few rooms do exactly, and they work one frequency band at a time. Treat every result as a planning estimate. ASTM C423, the US test for sound absorption, itself warns that lab coefficients “should be used with caution” in real rooms. Only a measurement in the finished room tells you exactly how it sounds.

How they connect to Plan my room

The worksheets are the quickest way to start. Fill in the room measurement worksheet, take photos of each wall, the ceiling and the floor, and send them with Plan my room. We return the room plan: a reverberation estimate for your room, the surfaces that drive it, a suggested target with its reasoning, and a panel plan with count, sizes, placement, finishes, code and accessibility notes and the test reports behind every number. Nothing is made until you approve a written quote. How we work explains each step, and ordering lists what you send and what you receive.

Send us the room

Room size, a few photos and what happens in the space. We reply with questions or an outline of the plan.

Plan my room