What you send and what you receive
What to measure and photograph, what the room plan contains, and what ships.
Plan my room
- You send
- Size, photos, finishes, use and constraints
- You receive first
- A written room plan and a quote
- Then
- Swatches, and a print proof for printed art
- Ships with the panels
- Placement labels, hardware and an install guide
An order with Fibson starts with information going one way and a plan coming back the other. You tell us about the room; we send back a written room plan and a quote; only when you approve them is anything made. This page covers both halves: what to gather, how to measure and photograph it, what the room plan contains and what arrives with the panels.
What you send
Measurements
Measure length, width and ceiling height. If the ceiling slopes, steps or has a bulkhead, measure the highest and lowest points and note where they are. Add the size of every window, glass partition and door, because glass and hard doors reflect sound differently from painted walls. Note where lights, sprinkler heads, air diffusers, outlets and switches sit; panels have to fit around them. A tape measure and a sketch are enough. The room measurement worksheet walks through each measurement and exports a file you can send.
Photos
Photos tell us more than any list. For each room, take:
- Each wall straight on, standing near the opposite wall, so the whole wall is in frame.
- The ceiling, including any exposed structure, beams or ductwork you would hang clouds or baffles from.
- The floor, close enough to see the material.
- A wide shot from two corners, so we can see how the room fits together.
- Anything soft already there: booths, curtains, rugs, upholstered chairs, shelving.
Daylight and lights on is best. A tape measure in one or two shots helps with scale.
Finishes
What each surface is made of: sealed concrete, tile, wood, carpet, painted gypsum board, brick, exposed concrete, glass, acoustic ceiling tile. If you are not sure, describe it (“hard, cold, painted, sounds hollow when knocked”) and we will ask. The surface finish worksheet has a row for each surface.
How the room is used
How many people, doing what, and when it sounds worst. Tell us what bothers you in your own words: guests leaning in to hear each other, a meeting room where calls sound like a bathroom, a kitchen that carries every clatter into the living room.
Constraints and artwork
Landlord or building rules, colors to match, a budget range, a date you are working toward, and whether the ceiling structure can carry hanging panels. If you want printed art panels, send high-resolution artwork you own or have licensed.
How to send it
Start with the contact form or email sales@fibson.com. The form takes text only, so if you have photos or drawings, say so and we will reply with where to send them. If something is missing, we ask before we estimate.
What the room plan contains
The room plan is the document you receive before ordering. It is written to be read without an acoustics background and to be checked by anyone who has one:
- Room summary. Dimensions, volume, use and the conditions of the estimate (furnished, unoccupied, frequency range).
- Surface inventory. Every surface with its area, the absorption coefficient assumed and where that figure came from.
- Reverberation time now, with the formula and the arithmetic.
- Target and reasoning, including any published reference used.
- Panel schedule. Each panel group with its type, size, count, area, assumed coefficient and the absorption it adds.
- Reverberation time after, with the same arithmetic.
- Drawings. A ceiling plan and wall elevations showing where every panel goes.
- Finishes. The shortlist, matched to the swatches we send.
- Code and accessibility notes for the room.
- Documents relied on. The core and fabric makers’ test reports by method, edition, mounting type, lab and date, and the emissions and PFAS documents we have from each supplier. Fibson has not yet tested its finished panels, and the plan says so.
- Limits of the estimate. Where the method is least reliable for your room.
The quote is a separate written document, itemized line by line.
Sample room plan (outline)
Example (fictional). This is an outline of the room plan we would write for the fictional dining room on the example room page. It is not a Fibson project, and the coefficients are planning assumptions, not test results.
- Room summary. 60-seat dining room, 40 by 30 ft, 11 ft ceiling, volume 13,200 cu ft. Estimate for the room furnished and unoccupied, at mid frequencies (500 to 1,000 Hz).
- Surface inventory. Floor, sealed wood, 1,200 sq ft at 0.07 = 84.0 sabins. Ceiling, painted gypsum board, 1,200 sq ft at 0.05 = 60.0. Storefront glass, 220 sq ft at 0.12 = 26.4. Walls, painted gypsum board, 1,320 sq ft at 0.05 = 66.0. Tables, chairs and bar, allowance 40.0. Total 276.4 sabins.
- Reverberation time now. RT60 = 0.049 × 13,200 ÷ 276.4 = 646.8 ÷ 276.4 = 2.34 s (about 2.3 s).
- Target and reasoning. About 1 second. No code sets a restaurant target, so this is a planning choice. For reference, LEED v4.1 lists under 0.8 s for hotel meeting or banquet rooms.
- Panel schedule. 16 ceiling clouds, 4 by 4 ft, 256 sq ft at 0.90 = 230.4 sabins. 14 fabric wall panels, 2 by 4 ft, seven on each long wall at seated ear height, 112 sq ft at 0.80 over gypsum at 0.05 (net 0.75) = 84.0. 4 printed art panels, 4 by 6 ft, two on each long wall, 96 sq ft at net 0.75 = 72.0. Added 386.4 sabins.
- Reverberation time after. 646.8 ÷ 662.8 = 0.98 s (about 1.0 s).
- Drawings. Ceiling plan with the clouds in four rows of four over the tables; elevations of both long walls.
- Finishes. Shortlisted fabric colors for the clouds and wall panels, and the client’s artwork for the printed panels.
- Code and accessibility notes. Wall panels project about 2.5 in with mounting, within the 4 in limit of ADA 307.2. Clouds hang with at least 80 in clear (ADA 307.4). Panels are interior finish under IBC 806.2; the required class comes from Table 803.13, and the local building official decides.
- Documents relied on. In a real plan: each core and fabric maker’s ASTM C423 and ASTM E84 reports with edition, mounting type, lab and date. In this example the coefficients are assumptions.
- Limits. Assumes sound spreads evenly through the room; an occupied room will ring less than the estimate.
What ships
When you approve the plan and quote, the panels are made to the approved schedule. With them you receive:
- Panels labeled for placement, each matched to its position on the plan.
- Mounting hardware for the walls and ceiling in your plan.
- A written install guide for you or your installer.
- Help with installation. We can walk your installer through the plan. We do not send our own crew; see installation support.
Prices and timing are not on this site because both depend on the sizes, finishes and quantities in your plan. The written quote prices your project and governs the order; ask about timing when you receive it.
Send us the room
Room size, a few photos and what happens in the space. We reply with questions or an outline of the plan.