Fibson homePlan my room
Menu

Wood slat panels

Wood or veneer slats over acoustic felt, for rooms that want timber.

Plan my room
A tall slatted wooden garden gate standing half open in a dense olive felt hedge.
Built from
Wood or veneer slats on an acoustic felt backer
Absorbs through
The gaps between slats and the felt behind
Planned around
Outlets, switches, doors and trim
Fire data
The wood finish needs its own E84 report

A wood slat panel is a row of wood or veneer slats fixed side by side, with narrow gaps between them, on a backing of acoustic felt. Wood itself is hard and reflects sound. The absorption comes from the felt that shows between the slats and from any cavity behind the panel; the slats set the look and protect the felt. For living rooms, lobbies, meeting rooms and restaurant walls that want warm timber rather than fabric, it is the panel that looks like part of the room.

How it is built

  • Slats. Solid wood, or veneer over a core, in a chosen width, profile and finish.
  • Gaps. The spacing between slats sets how much felt the sound can reach. Wider gaps expose more felt; narrower gaps look tighter and absorb less.
  • Backer. A layer of acoustic felt, often dark so the gaps read as shadow lines.
  • Mounting. Fixed directly to the wall, or on battens with a cavity behind. A cavity, especially one filled with absorptive material, improves absorption at lower frequencies. The air gap calculator shows the frequency at which a given depth starts to help.

Where it works best

  • Living rooms, open-plan kitchens and stairwells where a wood wall suits the house.
  • Lobbies and reception walls, the wall behind a television, or a wall above a banquette.
  • Meeting rooms, as a feature wall facing the camera.
  • Rooms that need moderate absorption and a face that stands up to knocks better than fabric.

Where it does not

  • Rooms that need a lot of absorption. Only the open area between slats is working, so a slat wall absorbs less than the same area of fabric-wrapped panel. A loud dining room usually needs clouds or fabric panels as well.
  • Bass problems. Without a deep cavity, slat panels do little at low frequencies.
  • Wet areas and direct sun. Moisture moves wood, and sun changes its color over time.
  • Narrow corridors. Slats on battens can approach the 4 in projection limit on circulation paths.
  • Sound through walls. Like every panel here, a slat wall absorbs sound inside the room. It does not stop sound passing through the wall behind it.

Sizes and options

Made to your wall rather than to a catalog: panel width and height, slat width and profile, gap, vertical or horizontal orientation, end trims, and cutouts for outlets and switches, all marked on the elevation. Species and finishes are chosen with fire data in mind (see below). You see finish samples before anything is made, and custom fabrication explains the approvals.

How absorption is documented

Absorption data belongs to one tested combination: a given slat width and gap, on a given felt of a given thickness, in a given mounting. Only that combination may be described with that data. If you want wider gaps or a different felt, the data no longer applies, and the plan says so: we either find data for the new combination or keep to the tested one.

Fibson has not yet tested its finished panels. The proposal names the maker, the product and its construction, ASTM C423 with its edition, the mounting (Type A, laid directly on the test surface, or a spaced mounting with the cavity depth stated), the lab, and the report number and date. Installed results vary with room shape, furnishings, occupancy and mounting.

Fire: the wood needs its own data

A felt maker’s fire report covers the felt. It says nothing about the wood in front of it. Species, thickness and finish all affect how a wood surface burns, so the wood finish needs its own ASTM E84 data, and a class applies only to the combination the report covers. E84 itself notes that supporting materials can change results. The proposal gives the class, the flame spread and smoke-developed indices, the E84 edition and exactly what was tested.

Under the IBC, Class A is a flame spread index of 0 to 25, Class B 26 to 75 and Class C 76 to 200, each with a smoke-developed index of 450 or less. Which class a room needs depends on its occupancy, whether the building is sprinklered and where the wall is, and the local building official decides. If the room needs a better class than a chosen wood can document, the plan says so and offers a species, product or finish that has a report for that class.

Installation and code notes

  • Interior finish. Slat panels applied for acoustics are interior finish (IBC 806.2), and they must be fastened to stay attached at room temperatures of 200°F for at least 30 minutes (803.14).
  • Protrusion. On a circulation path, a panel with a leading edge more than 27 in and not more than 80 in above the floor may protrude at most 4 in, battens included (ADA 307.2).
  • Outlets and switches. Electrical boxes may need extending to the new surface, by an electrician and under local rules.
  • Letting wood settle. Wood moves with humidity; the install guide from installation support says how long to leave panels in the room before fixing them.

Care and cleaning

Dust the slats with a soft dry cloth and the gaps with a soft vacuum brush. Follow the finish maker’s guidance on cleaning products, and keep water off the felt.

Example (fictional). A homeowner plans a slat wall behind a sofa. The supplier’s report covers vertical slats 1 in wide with 1/2 in gaps on a 1/2 in felt backer, in Type A mounting. The homeowner asks for 1 in gaps for a bolder look. The plan notes that the report no longer describes that wall, asks the supplier for data on the wider spacing, and in the meantime marks the absorption figure as an assumption. A white oak finish stays on the shortlist only once its own E84 report is in hand. This is not a Fibson project.

Send us the room

Room size, a few photos and what happens in the space. We reply with questions or an outline of the plan.

Plan my room