Fibson homePlan my room
Menu

Acoustic panels for meeting and video-call rooms

Shorter echo in conference, huddle and video-call rooms, planned around the seats.

Plan my meeting room
Two felt tin-can telephones connected by a taut string stretched across a long table.
Reference figure
Under 0.6 s (LEED v4.1, conference rooms)
Typical coverage
Absorptive panels on 25% of the walls (GSA)
Placed by
The seats, the screen and what the camera sees
Not a fix for
Voices heard through the walls

Meeting rooms are usually small, hard and full of glass, and they now work as studios as much as rooms. The people at the table need to hear each other, and the people on the call need to hear all of them through one microphone on top of the screen or in the middle of the table. A room that sounds only a little lively in person can sound hollow at the far end of a call, because the microphone records every reflection that a listener in the room tunes out. This page covers conference rooms, huddle rooms and rooms built mainly for video calls.

What goes wrong

  • Too much ring. A drywall ceiling, a glass front, a whiteboard wall and a large table add up to a lot of hard surface around a small volume of air.
  • Flutter echo. Two hard, parallel walls bounce sound back and forth in a quick, buzzing repeat. Stand in the middle of the room and clap once: a zippy, metallic tail is flutter. Treating one wall of each parallel pair usually breaks it up.
  • The microphone is far away. A camera bar or a table microphone sits much farther from each talker than a headset does, so it hears more of the room and less of the voice.
  • Sound leaking out. If people in the corridor can follow a confidential meeting, that is a wall, door and ceiling problem, not an echo problem.

Reference figures

  • LEED v4.1 lists reverberation limits of under 0.6 seconds for conference rooms and for teleconference rooms, at 500, 1,000 and 2,000 Hz.
  • WELL v1, a legacy version marked as such by its publisher, set 0.6 seconds maximum for conference rooms.
  • GSA Sound Matters asks for absorptive panels on 25% of the walls, with a minimum NRC of 0.8, in conference, meeting and training rooms, and for meeting-room ceilings with an NRC of 0.8.

The same GSA guide asks for STC 53 walls around video conference rooms and STC 45 where speech must stay confidential. STC rates walls and other partitions, and it comes from a different family of tests than the absorption tests used for panels. A panel cannot give a room an STC. Panels shorten the echo inside; they do not stop voices passing through the wall.

On NRC: we do not quote one for our own panels, because Fibson has not yet tested its finished panels. Your plan names the core or fabric maker’s published report, the test method, its edition and the mounting type, so you can check the number against the GSA figure yourself.

What to look for in your room

  • Which walls face each other, and which of them are hard: a glass front opposite drywall, two bare short walls.
  • Where people sit, where the screen is, and where the camera and microphones are.
  • The ceiling. Acoustic tile in good condition already does a lot; painted drywall does almost nothing.
  • What the camera sees behind the seats, since that wall will be on every call.
  • Doors, glass and gaps above the ceiling, if privacy is part of the brief.

The meeting room acoustics checklist lists all of this in a form you can send us.

What a meeting-room plan usually includes

  • Fabric-wrapped wall panels at seated ear height on the solid wall opposite any glass, which is the most common parallel pair.
  • Panels on the wall behind the seats. It faces the screen and its microphone, so it sends voices straight back into the call, and it is the backdrop everyone sees. A printed art panel or a neat row of felt panels works well here.
  • Panels either side of the screen, because the screen wall is the parallel partner of the back wall.
  • A ceiling cloud over the table when the ceiling is hard, since a hard ceiling sends a strong early reflection straight down to the table and its microphone.
  • Huddle rooms follow the same logic on a smaller scale: panels on whichever walls are not glass, and often a cloud.
  • Accessibility notes. Panels beside a door or along a corridor stay within the ADA limit of 4 inches for objects with leading edges between 27 and 80 inches above the floor. The plan states each panel’s depth with its mounting.

The wall coverage calculator checks a layout against a coverage figure such as GSA’s 25%.

Example (fictional). Not a Fibson project. A 12-seat video-call room, 24 by 16 ft with a 9 ft painted drywall ceiling, carpet tile, one long wall of glass onto the corridor, and the screen and camera bar on a short wall. Volume 3,456 cu ft. The mid-frequency coefficients are planning assumptions, not test results.

Surface Area (sq ft) Coefficient Sabins
Floor, carpet tile 384 0.25 96.0
Ceiling, painted drywall 384 0.05 19.2
Walls, painted drywall 504 0.05 25.2
Glass wall 216 0.05 10.8
Table and chairs (allowance) 20.0
Total 171.2

RT60 = 0.049 × 3,456 ÷ 171.2 = 0.99 seconds.

The plan covers 180 sq ft, 25% of the room’s 720 sq ft of wall: eight 2 by 6 ft fabric panels on the long drywall wall opposite the glass (96 sq ft), two 4 by 6 ft printed art panels on the back wall the camera sees (48 sq ft) and two 3 by 6 ft fabric panels either side of the screen (36 sq ft). At an assumed 0.80 replacing drywall at 0.05, net 0.75, that adds 135.0 sabins. New total 306.2 sabins; RT60 = 0.049 × 3,456 ÷ 306.2 = 0.55 seconds, under the LEED v4.1 figure. One 4 by 8 ft cloud over the table (32 sq ft at 0.90, 28.8 sabins) would bring the total to 335.0 and the estimate to about 0.51 seconds.

If you are fitting out several rooms, send us the floor plan with a photo of each wall; rooms of the same size and finish can often share one plan. For a single room at home, see home offices, and for the open floor outside the meeting rooms, see offices.

Send us the room

Room size, a few photos and what happens in the space. We reply with questions or an outline of the plan.

Plan my meeting room