Meeting room acoustics checklist
Fourteen checks for a meeting room that sounds hollow on video calls.
Plan my room
- Items
- 14 in four groups
- Reference
- LEED v4.1 under 0.6 s for conference rooms
- Placement
- Two walls at seated head height, ceiling if hard
- Panels cannot
- Stop sound leaving the room
Checklist
A meeting room that sounds fine to the people in it can sound hollow and distant at the other end of a video call. The microphone picks up every reflection off the glass, the whiteboard and the table and sends them all. This checklist helps you hear the room the way the far end does, plan treatment that fixes the echo, and keep that separate from the different problem of sound leaving the room.
How to use it
Tick items as you confirm them. The list stays on this page and nothing is sent. Download the CSV or print it, or send it with Plan my room.
How it sounds on a call
Ask someone at the far end of a call whether the room sounds hollow or echoey; they hear it better than you do. Then, with the room empty, clap once in the middle and listen. A smooth fade is fine. A fast, buzzing repeat is flutter echo between two parallel hard walls, common in narrow rooms with glass on one side and drywall on the other. Check whether the video system picks up HVAC or hallway noise, and note where people sit relative to the microphone.
Surfaces
Count the hard parallel walls (glass, drywall, whiteboard), record the ceiling type and the floor finish, and measure the room and the table. Those numbers go into the reverberation time calculator.
Targets worth knowing
Meeting rooms are one of the few room types with published reverberation targets. LEED v4.1 lists under 0.6 s for conference rooms and for teleconference rooms, at 500, 1,000 and 2,000 Hz. The legacy WELL v1 standard set 0.6 s as the maximum for conference rooms. The US General Services Administration’s Sound Matters recommends ceilings of at least NRC 0.8 in meeting rooms, and “absorptive panels on 25% of walls with a minimum NRC of 0.8” in conference, meeting and training rooms.
Treatment plan
- Put panels on at least two adjacent or facing walls, at seated head height, where the voices and the microphone are.
- Consider the wall behind the display and the wall facing the camera first.
- Add ceiling absorption over the table if the ceiling is hard drywall or plaster.
- Keep whiteboards and screens clear.
Example (fictional). A meeting room 20 by 14 ft with a 9 ft ceiling has 612 sq ft of wall. Take out a door and a glass panel, about 80 sq ft together, and 532 sq ft is left. GSA’s 25 percent of that is 133 sq ft, or about seventeen 2 by 4 ft panels, split between the display wall and the wall opposite. The wall coverage calculator checks this one wall at a time.
Sound from outside the room
Panels absorb sound inside a room. They do not stop it passing through walls, doors or the ceiling. That is a separate job, rated with a different family of tests under ASTM E413: sound transmission class (STC) for walls, and ceiling attenuation class (CAC) for sound that travels over a wall through a shared ceiling space. GSA recommends walls of at least STC 53 around video conference rooms and STC 45 for confidential speech privacy.
So check the gaps under doors and around frames, and note whether the wall stops at a suspended ceiling with a shared plenum above it. If people outside can hear the meeting, the fix is in the walls, doors and seals, not in panels. Keep the two lists apart when you plan, so that neither budget is spent on the wrong problem.
Smaller rooms
The same checks apply to a huddle room, a phone booth built into a corner or a spare bedroom used for calls all day. In a small room, flutter echo between facing walls is often the main complaint, so treat at least one wall of each hard, facing pair. Home offices covers rooms at home.
Next steps
See meeting rooms for how we plan them and fabric-wrapped wall panels for sizes and finishes. Send the room with Plan my room.
Send us the room
Room size, a few photos and what happens in the space. We reply with questions or an outline of the plan.