Fibson homePlan my room
Menu

Fibson in Casper, Wyoming

Our office in Casper, and how we plan rooms anywhere from measurements and photos.

Plan my room
A felt landscape with a long flat-topped ridge in olive and heather above a winding sky-blue river, one cottonwood on the bank and a low saffron sun.
Office
5880 Enterprise Drive, Suite 500, Casper, WY 82609
Phone
(307) 394-2513
Rooms we plan
Anywhere in the US, from measurements and photos
Near Casper
Ask whether a visit would help

Fibson Acoustics LLC has its office in Casper, Wyoming. We plan and make acoustic panels to order for restaurants, offices, meeting rooms and homes, and because each plan is built from measurements and photos, the rooms we work on can be in Casper, elsewhere in Wyoming or anywhere in the US.

The office

The Casper address is an office. It is not a showroom or a workshop, so there are no panels on display there. You see finishes the way every client does: as swatches of your shortlisted fabrics and colors, sent with your quote. If you would like to talk a room through, call us, or send the room first so we can look at your photos and measurements before we speak.

How we work with rooms anywhere in the US

Most of what decides how a room sounds can be read from its size, its surfaces and how it is used. That is why we can plan a dining room in another state as carefully as one down the road:

  1. You send the room. Length, width and ceiling height, photos of each wall, the ceiling and the floor, what the surfaces are made of and how the room is used. The room measurement worksheet lists every measurement.
  2. We send the room estimate and the panel plan. The reverberation time now, a suggested target, then panel counts, sizes and placement drawn on your walls and ceiling, with code and accessibility notes and the test reports behind every number.
  3. You approve samples and a quote. Nothing is made until you do.
  4. Panels arrive ready to hang. Each is labeled for its position on the plan, with mounting hardware and a written install guide. We help you or your installer by phone and email.

How we work covers each step in detail, and what you send and what you receive explains how to measure and photograph a room so the estimate starts from good information.

Rooms in and near Casper

If your room is in or near Casper, ask whether a visit makes sense. Sometimes a visit tells us something photos cannot, such as how a stepped ceiling meets a wall or what is above a drop ceiling; often it adds little to a good set of measurements and photos. We will tell you plainly which we think applies to your room, and what a visit would involve, before anything is arranged.

Building codes in Wyoming

Acoustic panels are treated as interior finish under the International Building Code, and the fire class required depends on the type of building and where the panels go. Which edition of the code applies, and with what local amendments, is decided by the jurisdiction where your building is. In Casper, as anywhere, the local building official decides. Your room plan flags the interior finish and accessibility points that matter for your room so you can raise them early; it does not replace that review. Materials and safety explains the classes and the reports behind them.

The rooms we plan for

Wherever your room is, the first step is the same: send us the room, and we will reply with questions or an outline of the plan.

Send us the room

Room size, a few photos and what happens in the space. We reply with questions or an outline of the plan.

Plan my room