Fibson homePlan my room
Menu

Acoustic panels for home offices and podcast corners

Less echo on calls and recordings, from a few panels in the right places.

Plan my home office
A felt reading lamp bends over a small desk with a closed notebook, beside a closed door with a tassel hanging from its handle.
Main problem
Echo the microphone hears more than you do
Usual plan
Panels facing you, beside the desk, behind you
Reference figure
Under 0.6 s (LEED v4.1, teleconference rooms)
Not a fix for
Traffic, neighbors, the dog, the furnace

The Bureau of Labor Statistics reported that one out of five workers teleworked in August 2023. For each of them, the room they work in is also the room their colleagues hear. A spare bedroom with a wood floor and bare walls can sound fine while you sit in it and hollow on the other end of a call. This page is for remote workers, coaches, podcasters and anyone else who calls or records from home, in a home office, a small studio or a corner of another room.

Why calls echo when the room seems fine

You hear a room with two ears, and your brain separates your own voice from the reflections that follow it. A laptop or webcam microphone cannot. It sits an arm’s length or more from your mouth and records your voice and the room’s reply at almost the same level. In a small room with hard walls, the reply arrives quickly and strongly, which is what makes a voice sound boxy or far away to the people listening.

Reflections versus background noise

These are two different problems, and panels solve only one of them.

  • Reflections are your own voice coming back off the walls, the desk, the window and the floor. Panels absorb them.
  • Background noise is everything else: traffic, a neighbor’s mower, the furnace, the dishwasher, the dog. Panels do very little about sound coming into the room through walls and windows. In GSA’s Absorb, Block, Cover terms, that is a blocking job, and it needs sealed doors and windows, heavier construction or simply a different room. A closer microphone helps with both, because it raises your voice relative to everything else.

A quick test: record ten seconds of silence, then ten seconds of yourself talking, and listen back on headphones. Hiss, hum or traffic in the silent part is noise. A hollow tail on your words is reflection.

What to look for in your room

  • Where the desk sits: facing a wall, a window or the middle of the room.
  • Bare walls close to the desk, a hard floor, a window or glass door.
  • Room size and shape, including a closet you could leave open (a closet full of clothes absorbs a lot).
  • What the camera sees behind you.

The room measurement worksheet shows what to measure and photograph.

What a home office plan usually includes

  • Panels on the wall you face, behind the monitor and camera. This wall sends your voice straight back to the microphone.
  • Panels on the side walls beside the desk, level with your head when seated, where the next strongest reflections land.
  • A panel behind you, in the camera’s view. A printed art panel or a group of felt panels treats the wall and gives the call a background worth looking at.
  • A rug under the chair if the floor is hard.
  • For a podcast corner, where two people face each other across a table: panels on the walls behind each speaker and, under a hard ceiling, a small ceiling cloud over the table.

Small rooms also have a low-frequency side. Thin panels absorb mostly mid and high frequencies, so a boomy voice in a small room may need thicker fabric-wrapped panels or a gap behind them. The air gap calculator shows how a mounting gap shifts the frequencies a panel works on. At home, the install guide names fixings for your wall type.

Example (fictional). Not a Fibson project. A spare-bedroom office, 12 by 10 ft with an 8 ft drywall ceiling, a wood floor and one 4 by 5 ft window. Volume 960 cu ft. The mid-frequency coefficients are planning assumptions, not test results.

Surface Area (sq ft) Coefficient Sabins
Floor, wood 120 0.07 8.4
Ceiling, painted drywall 120 0.05 6.0
Walls, painted drywall 332 0.05 16.6
Window 20 0.12 2.4
Desk, chair and shelf (allowance) 6.0
Total 39.4

Now: RT60 = 0.049 × 960 ÷ 39.4 = 47.04 ÷ 39.4 = 1.19 seconds.

The plan adds two 2 by 4 ft fabric panels on the wall behind the monitor, one 2 by 4 ft panel on each side wall beside the desk and one 3 by 4 ft printed art panel behind the chair: 44 sq ft at an assumed 0.80 replacing drywall at 0.05, net 0.75, for 33.0 sabins. Total 72.4; RT60 = 47.04 ÷ 72.4 = 0.65 seconds. A 5 by 8 ft rug (40 sq ft at an assumed 0.40 replacing wood at 0.07, net 0.33: 13.2 sabins) brings the total to 85.6 and the estimate to 47.04 ÷ 85.6 = 0.55 seconds, under the LEED v4.1 figure for teleconference rooms that we use here as a reference. In a room this small the Sabine estimate is a rough guide, not a promise.

If you call or record from home, send us the room with a photo of each wall and of your desk setup. For shared rooms at work, see meeting rooms.

Send us the room

Room size, a few photos and what happens in the space. We reply with questions or an outline of the plan.

Plan my home office