Fibson homePlan my room
Menu

Room measurement worksheet

What to measure, photograph and note before you ask for a room plan.

Plan my room
A folding wooden carpenter's ruler zigzagging across a felt floor plan outline of a single room.
You need
A tape or laser measure and a phone camera
You record
Size, finishes, glass, ceiling items and use
Output
A CSV file or a printed sheet
Send it
With Plan my room on the contact page

Worksheet

The answers filled in describe a fictional dining room. Replace them with your room, add rows, then download a CSV or print it to send with your inquiry. Nothing leaves your browser.

What to recordYour measurement or answerNotesRemove

The first step of every room plan is sending us the room. This worksheet lists what we need: the measurements, the finishes, what is on the ceiling and how the room is used. Fill it in once, download or print it, and send it with your photos when you ask us to plan your room. What you type stays in your browser until you download it.

How to use the worksheet

The rows come filled in with sample answers for a fictional dining room, so you can see the level of detail that helps. Replace each answer with yours and use the notes column for anything that does not fit. Add rows for anything else about the room, such as a mezzanine, an open kitchen or a second seating area, and remove rows that do not apply. When you are done, Download CSV saves a file you can attach to an email, and Print gives you a paper copy.

Two rows on the sheet are easy to skip and worth filling in: what bothers you about the room and when (“Friday dinner, the bar end is the worst”), and any constraints, such as landlord rules about the ceiling, walls that cannot be drilled or colors that must match. Both shape the target and the plan.

How to measure

  • Length and width. Measure wall to wall at floor level, across the middle of the room. A laser measure is quickest; a tape works with two people. The nearest half foot is close enough.
  • Ceiling height. Measure at the lowest and the highest points. Note beams, soffits, bulkheads, skylights and slopes, and how far each one drops.
  • Odd shapes. For an L-shaped or stepped room, measure each rectangle separately and sketch the plan on paper with the numbers on it. A photo of the sketch is enough.
  • Windows and glass. Measure the width and height of each window, glass door and glass partition and add up the areas. Glass is one of the hard surfaces in the estimate, and it cannot carry panels.
  • Doors and openings. Note doors, pass-throughs and wide openings into other rooms. Sound travels through them both ways.
  • People. How many people use the room at a busy time: seats, desks or guests.
  • Sound sources. Music, speakers, televisions, the coffee machine, an open kitchen, and where each one is.

How to photograph the room

Photos tell us more than any description. Take them with the lights on.

  1. Stand in each corner and photograph across the room, so each shot shows two walls and some ceiling. Four corners cover the room.
  2. Photograph each wall straight on, with its windows, artwork and anything fixed to it.
  3. Point the camera straight up and photograph the whole ceiling, with the sprinkler heads, lights, air diffusers and any beams in view. Panels have to work around all of them.
  4. Photograph the floor, and take close-ups of anything unusual: brick, tile, wood slats, an existing acoustic ceiling.
  5. Put the tape measure in one or two shots for scale.

If you are not sure what a surface is made of, describe it and photograph it up close. “Painted, hard, sounds hollow when knocked” is useful.

Example (fictional). The sample answers describe a 40 by 30 ft dining room with an 11 ft ceiling, a sealed wood floor, 220 sq ft of glass, 60 seats, four ceiling speakers and sprinkler heads about every 12 ft. It is close to our example room, with one difference: a sample answer mentions a brick wall to show how to record a mixed finish, while the example room’s walls are all painted drywall.

What happens next

Send the worksheet and photos with Plan my room, or email them to sales@fibson.com. We use them to build the room estimate: the reverberation time now, the surfaces that drive it and a suggested target with its reasoning. If something is missing, we ask. The room plan then adds the panel count, sizes and placement on your walls and ceiling, finishes, code and accessibility notes, and the test reports behind every number. Samples and a written, itemized quote follow, and nothing is made until you approve. How we work and ordering explain each step.

Running the numbers yourself

Carry your measurements into the reverberation time calculator for a quick estimate, or into the surface finish worksheet to list each surface with its own absorption coefficient. Send the worksheet either way; it saves a round of questions.

Send us the room

Room size, a few photos and what happens in the space. We reply with questions or an outline of the plan.

Plan my room