Design trade
Samples, spec sheets and spec text for architects, designers and contractors.
Request samples and spec sheets
- For
- Architects, interior designers and contractors
- You get
- Samples, spec sheets and draft specification text
- Data cited by
- Lab, method, edition and mounting
- Not yet
- Fibson test data or a BIM and CAD library
If you specify panels for a client, you need more than a good swatch. You need documents that survive a submittal review, numbers you can trace to a lab, and a plan you can put in front of a client who has never heard of reverberation time. The design trade program is how architects, interior designers and contractors work with Fibson, and it is built around documentation we can stand behind.
What you can request
- Sample sets. Physical swatches of the fabrics, felts and wood finishes for the panel types in your project, so you can build a finish board and check color in the room’s own light.
- Spec sheets. One per panel type, citing every source test report by lab, method, edition, mounting, report number and date, with the full table by frequency band as well as any single-number rating.
- Draft specification text. Editable text describing the panels, their materials, the documents to be submitted and the installation requirements, for you to adapt to your project manual.
- Room plans for client presentations. The same room plan we prepare for owners: the estimate before and after, options compared side by side, numbered drawings and finish samples, written in plain language your client can follow. The example room shows one for a fictional dining room.
- Material-health documents. Supplier emissions reports and PFAS statements, listed with their dates. Two California changes take effect on January 1, 2027: CDPH Standard Method v1.3 brings in new VOC emission criteria, and the PFAS threshold for textile articles drops to 50 ppm. We list the documents; whether a given fabric is a textile article under that law is a question for your client’s advisers.
How spec sheets cite performance
Every absorption figure follows the same pattern:
This plan uses absorption data published by [core maker] for [product, thickness, density], tested to ASTM C423 [edition] in [mounting type, for example Type A, laid directly on the test surface] by [lab], report [number, date]. Fibson has not yet tested its finished panels. Your proposal lists every report we relied on. Installed results vary with room shape, furnishings, occupancy and mounting.
We state NRC to the nearest 0.05 and SAA to the nearest 0.01, and say which one we are quoting. Where a source reports to ISO 354 with a weighted coefficient (alpha-w, ISO 11654), we give it as reported and do not convert it into an NRC. Ceiling clouds cite suspended-mounting data, and ceiling baffles cite sabins per baffle. The NRC calculator lets you check a single-number rating against a report’s band table.
For fire, the spec sheet gives the ASTM E84 class, the flame spread and smoke-developed indices, the edition and exactly what was tested, and it states that a class applies to the panel only where the report covers the assembly as built. E84 itself notes that supporting materials can change results. The acoustic panel spec checklist lists the same questions to ask any supplier, including us.
Honest limits
- No Fibson test data yet. We have not tested our finished panels, so every number comes from a core, felt or fabric maker’s published report.
- No BIM or CAD library yet. Room plans include dimensioned drawings, but there are no downloadable families or blocks.
- No “approved equal” claims. We do not claim our panels are equal to a named product in your specification. If you propose Fibson as a substitution, the reviewer compares documents, and we give you the documents to compare.
- Not a code approval. The plan flags interior finish classes, fastening that stays attached at 200°F for 30 minutes (IBC 803.14) and ADA clearances, but the local building official decides. We do not claim licensed engineering or professional acoustician status.
How a trade project runs
- Send the project type, occupancy, room sizes and finish intent through the contact page.
- We send sample sets and spec sheets for the panel types that fit.
- For rooms that need numbers, we prepare the acoustic design and the room plan.
- Your client approves the samples, panel schedule and quote, and the panels are made to order and labeled to the drawings.
- Your contractor gets the hardware, the install guide and a walk-through from installation support.
Example (fictional). Harbor Lane Interiors (fictional) is fitting out a conference room for a client who spends the day on video calls. They request samples and spec sheets for fabric wall panels and ceiling clouds. The wall panel sheet cites a core maker’s report in Type A mounting; the cloud sheet cites a separate report in a suspended mounting. Each line names the lab, the ASTM C423 edition, and the report number and date, and says that Fibson has not tested the finished panel. The designer drops both sheets into the submittal, and the reviewer can trace every number to a named report. This is not a Fibson project.
Send us the room
Room size, a few photos and what happens in the space. We reply with questions or an outline of the plan.