Fibson homePlan my room
Menu

Acoustic design

Where the absorption goes, what it looks like and what it is made of.

Plan my room
A drafting compass drawing a clean saffron arc across an oat sheet, with a small set square and a pencil beside it.
Starts from
The room estimate and a target you agree
You receive
Drawings, a panel schedule, samples and a quote
Includes
Code and accessibility notes for each room
Is not
A code approval or an engineered design

The room acoustic assessment tells you how long the room rings and roughly how much absorption it needs. Acoustic design decides where that absorption goes, what it looks like and what it is made of. It covers steps 3 and 4 of how we work, the panel plan and the samples and quote, and it ends with the room plan: the document you approve before anything is made.

Setting the target

A target is a decay time that suits how the room is used, and we agree it with you before drawing anything. For some rooms there are published references. LEED v4.1 lists reverberation times under 0.6 s for conference rooms, teleconference rooms and private offices, and under 0.8 s for open-plan offices without sound masking and for hotel meeting or banquet rooms. No code sets a target for a restaurant, a cafe or a living room, so there the target is a planning choice, and the plan explains it: how lively the owner wants the room to feel, how many people talk at once and how far the room can realistically come down.

From target to quantities

The Sabine equation runs backward as well as forward. In feet, the absorption a room needs is:

absorption needed = 0.049 × volume ÷ target time

Subtract what the room already has, and the difference is what the panels must add. Each panel adds its area times its absorption coefficient, less the absorption of the surface it covers. The panel quantity calculator does the same arithmetic. We run it band by band, because a panel that does well at 1,000 Hz may do little at 250 Hz.

Placement on walls and ceiling

Quantity is half the plan; where the panels go is the other half. We look for:

  • Surfaces near the talkers. The ceiling over the tables or desks, and walls at seated or standing ear height.
  • Parallel pairs. Facing hard walls that flutter need panels on at least one side.
  • Spread, not one patch. The estimate assumes sound and absorption are spread through the room, and ASTM C423 itself warns that lab coefficients should be used with caution in real rooms. Panels gathered on one wall do less than the arithmetic suggests.
  • Obstacles. Windows, doors, art, shelving, outlets, switches, sprinklers, lights, detectors and diffusers, all drawn on the plan.
  • Wear. Where shoulders, chairs and carts will hit, panels go higher or get a tougher finish.

The wall coverage calculator shows how much of a wall a given grid would cover.

Finishes and colors

Panels can disappear into the walls or become the room’s feature. We shortlist fabrics, felts, wood finishes or printed art to suit the room and its use, and send physical samples, because color on a screen is not color on a wall. A dining room might pair quiet ceiling clouds with printed art panels as the feature; an office might use felt panels in its brand colors.

Code and accessibility notes, room by room

For each room the plan notes:

  • the interior finish class the room is likely to need, which under the IBC depends on occupancy, sprinklers and location, and the report that covers each panel type as built;
  • fastening that keeps panels attached at room temperatures of 200°F for at least 30 minutes (IBC 803.14);
  • how far wall panels project on circulation paths, at most 4 in where the leading edge is more than 27 in and not more than 80 in above the floor (ADA 307.2), and at least 80 in of clearance under clouds and baffles (ADA 307.4);
  • sprinklers, lights and detectors to coordinate with your trades.

What the room plan contains

  • The estimate before and after, with the volume, the surface list and the assumptions shown.
  • The target and the reasoning behind it.
  • Plan and elevation drawings with every panel numbered.
  • A panel schedule: number, type, size, thickness, core, finish, mounting and location.
  • Finish samples for the shortlist.
  • Code and accessibility notes for each room.
  • Every test report the numbers rely on, by maker, lab, method, edition, mounting, report number and date.
  • A written, itemized quote. Nothing is made until you approve.

Example (fictional). The example dining room starts at 2.34 s. With a target of about 1 s, a planning choice, the plan compared the panel groups before settling on all three:

Panels added Estimated RT60
None 2.34 s
14 fabric wall panels only 1.79 s
4 printed art panels only 1.86 s
16 ceiling clouds only 1.28 s
Wall and art panels 1.50 s
Clouds and art panels 1.12 s
Clouds and wall panels 1.09 s
All three groups 0.98 s

The walls alone could not get there, so the ceiling carries the largest group. The coefficients are planning assumptions, not test results. This is not a Fibson project.

Honest limits

The room plan is not a code approval; the local building official decides what applies to your building. Fibson does not claim licensed engineering or professional acoustician status. Where a question needs one, such as whether a ceiling structure can carry a load, we say so, and you engage a licensed professional. The estimate is a model that assumes sound spreads evenly through the room. And panels absorb sound inside a room; they do not stop it passing through walls, so if the problem is sound from next door, the plan will say that panels are the wrong tool.

Send us the room

Room size, a few photos and what happens in the space. We reply with questions or an outline of the plan.

Plan my room