Restaurant acoustics checklist
Nineteen checks for a dining room where guests struggle to talk.
Plan my room
- Items
- 19 in five groups
- Start
- At the busiest service of the week
- Covers
- Surfaces, panel space, codes and follow-up
- Then
- Send your notes with Plan my room
Checklist
Noise topped the list of diner complaints in Zagat’s 2018 national survey: 24 percent of diners named it the most bothersome part of eating out, just ahead of service at 23 percent. Most loud dining rooms share a cause: hard floors, hard ceilings, glass, and a full house of people raising their voices over each other. This checklist walks you through the room before you buy anything, so the fix goes on the right surfaces and gets approved by the right people.
How to use it
Tick items as you confirm them. The list stays on this page and nothing is sent. When you are done, download the CSV or print it and keep it with your notes, or send it with Plan my room.
Listen first
Visit at the busiest service of the week, because that is when the problem is real. In Hong Kong, To and Chung measured peak-hour levels of 66.7 to 82.6 dBA across restaurant types and found they “depended on the levels of occupancy density only”. The fuller the room, the louder it gets, and guests talk louder as it does; researchers call this the Lombard effect. Note when conversation gets hard and where: the bar, the booths, the open kitchen, the window tables.
A phone sound meter app is fine for comparing music on and music off at the same seat. It is not a calibrated instrument, so use it for before and after, not for absolute numbers. To see how sources combine, try the decibel addition calculator.
Hard surfaces
Record the ceiling (exposed deck, drywall or tile), the floor and any rugs, and mark large areas of glass, tile, brick and concrete. Measure the footprint and the ceiling height. These numbers go straight into the reverberation time calculator, and they show where absorption will do the most. In many dining rooms the ceiling is the largest hard surface, right over the tables.
Where panels can go
Look up first. Ceiling clouds or baffles have to fit between the lights, sprinkler heads and air diffusers, so photograph the whole ceiling, and ask the landlord or building owner about hanging from the structure. On the walls, look for space at seated ear height where guests will not lean on panels or scuff them. Near the kitchen, the bar and the restrooms, choose finishes that wipe clean.
Rules and approvals
- Interior finish class. The International Building Code treats paneling applied “for decoration, acoustical correction, surface insulation or other purposes” as interior finish (section 806.2 in the 2021 edition). The class it needs depends on occupancy and sprinklers. In the 2021 edition’s Table 803.13, dining rooms (Group A-2) need Class C in rooms when sprinklered and Class B when not, and a footnote permits Class C in places of assembly with 300 or fewer occupants. Your city may use a different edition or local amendments, so ask the building or fire official which class applies.
- Sprinklers and exit signs. Keep panels out of sprinkler spray patterns and clear of exit signs.
- Walking routes. Wall panels with a leading edge between 27 and 80 in above the floor may protrude no more than 4 in into a walking route (2010 ADA Standards, 307.2), and clouds or baffles over a walking route need 80 in clear below them (307.4). The ADA protrusion checker tests both.
- Test reports. Collect the fire and absorption test reports for the materials before ordering. A fire class counts only when the report covers the assembly as built, core, fabric and adhesive together. The acoustic panel spec checklist lists what to ask for.
After installation
Go back at the same busy service and compare against your first notes. Ask staff whether taking orders and talking at the table are easier; they hear the room every night. Keep the cleaning instructions for each finish in the maintenance file.
Why it is worth the effort
A 2022 study by Bottalico and colleagues found that background noise below 50 dBA lets older diners keep their vocal effort low and their understanding of conversation high, keeping their “willingness to spend time and money high”. A full dining room will rarely be that quiet, but a shorter reverberation time moves it in that direction. OSHA’s noise standard does not settle the question either way: it protects staff hearing over a shift and sets no target for whether guests can talk.
Example (fictional). The example room is a 60-seat dining room, not a Fibson project, with painted drywall walls and ceiling, a sealed wood floor and storefront glass. It estimates at about 2.3 seconds. The plan adds 16 ceiling clouds, 14 fabric wall panels at seated ear height and 4 printed art panels and brings it to about 1.0 second, with the wall panels projecting about 2.5 in and the clouds at least 80 in clear of the floor.
Next steps
See how we plan dining rooms on restaurants, then send your notes and photos with Plan my room.
Send us the room
Room size, a few photos and what happens in the space. We reply with questions or an outline of the plan.