A loud coffee shop usually has two separate problems: a few very loud machines behind the bar (grinders, steam wands, blenders, ice) and a small, hard room that keeps every sound, chatter included, ringing for a second or two. Treat them separately. At the bar, move, isolate, time and maintain the machines; in the room, put absorption high up, on the ceiling over the seats and the upper walls, in finishes that tolerate steam and handling. Because a cafe’s volume is small, a modest amount of absorption changes its reverberation a lot.
Cafes are not small restaurants. They have lower ceilings, smaller rooms, loud point sources a few feet from the customers, a queue at the counter and a mix of people working alone on laptops and groups catching up. This guide, written for cafe owners, roasters with retail bars and the designers who fit them out, covers what to measure, what to change behind the bar, where panels go when the ceiling is low and cluttered, how to keep finishes clean near steam and milk, and what workplace noise limits mean for baristas. For full-service dining rooms, see our guide on how to make a loud restaurant quieter.
Why do cafes sound different from restaurants?
Cafes concentrate loud, sharp sources in a small, hard room, with customers who want very different things. That mix makes the noise problem both easier and harder than in a dining room.
Four differences that matter
- Small volume. A 600 to 1,000 sq ft cafe with a 9 or 10 ft ceiling holds a fraction of the air of a dining room. Sound has less room to fade, but each square foot of absorption also counts for more.
- Low or crowded ceilings. Lights, diffusers, sprinkler heads, exposed ducts and menu boards compete for the one surface that is easiest to treat.
- Point sources at close range. A grinder, a steam wand or a blender a few feet from the nearest stool is a different problem from a restaurant’s crowd of voices. Machine noise comes in bursts; crowd noise builds.
- Mixed users. Laptop workers want a steady, moderate background. Groups want to talk. People in the queue want to hear the barista. A cafe has to serve all three in one room.
How loud is a typical cafe?
Published data on cafes are thinner than on restaurants, and most come from crowd-sourced phone apps rather than calibrated meters, so treat them as indications. SoundPrint, a sound measurement app, analyzed more than 10,000 user readings from US restaurants, bars and coffee shops, each tagged by the user as great, moderate or difficult for conversation. Its findings for coffee shops:
- Venues under 70 dBA were generally rated “great” for conversation, in coffee shops as elsewhere.
- The median coffee shop reading tagged “moderate” was 71 dBA, lower than for restaurants (75 dBA).
- The median reading at which users rated a coffee shop too difficult for conversation, working or studying was 74 dBA, about six decibels below the equivalent for restaurants. About 37 percent of coffee shops in its database read above 74 dBA.
People expect a cafe to be quieter than a restaurant, so a level that passes in a dining room can feel too loud over a latte. For scale, the National Institute on Deafness and Other Communication Disorders lists normal conversation at 60 to 70 dBA, so a 74 dBA room is one where everyone is already talking above normal. In a separate comparison of more than 1,400 readings at coffee chains, including 886 Starbucks locations, SoundPrint found Starbucks stores generally 1 to 4 dB louder than other coffee shops, with the biggest gaps around 8 am and 3 pm. Neither post gives a publication date, and the readings are averages of user submissions, not a survey.
Research on voices points the same way. In Bottalico and colleagues’ 2022 laboratory study of adults over 60, background noise below 50 dB(A) kept vocal effort low and understanding high, and voices rose faster once noise passed about 57 to 58 dB(A). SoundPrint’s figures suggest most busy cafes sit well above both lines at peak.
Source or room? How to tell which problem you have
Before you buy anything, find out how much of the noise comes from the machines and how much from the room. A sound level meter app, a notebook and two visits, one quiet and one busy, are enough.
A simple measuring routine
SoundPrint’s own advice for venue managers is a good starting point: take several readings at peak days and hours, in dBA rather than other weightings, in the center of the space, away from hard surfaces and away from loud sources. For a cafe, add two more positions.
- Seating. Stand or sit at the table where customers stay longest, usually the far end of the room.
- The bar. Measure at the barista’s working position, at ear height, during a grinder burst and during steaming.
- The queue. Measure where customers order and wait. This is where staff and customers must hear each other.
- Two times. Repeat at a quiet hour with the machines running normally, and at your busiest hour.
- One clap. In the empty room before opening, clap once and listen for a ring that hangs on. That ring is reverberation.
Reading the results
| What you notice | What it points to | Where to start |
|---|---|---|
| Seating is loud even when only a few people are in | Machines, music or HVAC carrying across the room | Behind the bar and the sound system |
| Seating gets much louder as the room fills | Chatter built up by reverberation | Ceiling and upper-wall absorption |
| The bar reads far louder than the seats during grinding | A strong point source, mostly direct sound | Placement, isolation and timing |
| Staff ask customers to repeat orders | Noise at the order point, from machines and the queue | Move or time the loudest machine; absorption above the counter |
| A clap rings between two long walls | Hard parallel surfaces in a narrow room | Panels on one or both long walls |
Example (fictional). Pine and Ember Coffee (fictional) is a 24-seat cafe. These readings are invented to show the method, not measurements of a real room. At 2 pm with six customers, the far table reads 62 dBA between grinder bursts and 66 dBA during them, and the barista position reads much higher during grinding. At 8:30 am with every seat taken and a queue at the door, the far table reads 75 dBA whether or not the grinder is running.
The afternoon readings say the grinder carries across a quiet room, so placement and timing help. The morning reading says that at peak, chatter built up by the room is the main problem, and the grinder is lost in it. This cafe needs both: changes at the bar for the quiet hours, and absorption for the rush.
Behind the bar: grinders, steam wands, blenders and ice
Machine noise is loudest for the people closest to it: the baristas. The fixes are mostly about where machines sit, what they sit on, and when they run. Absorption in the room helps with what reflects back, but it cannot remove the direct sound from a grinder 2 feet away.
What baristas say is loud
In a 2016 study of baristas in Portland published in the International Journal of Audiology, Pursley and Saunders asked 15 baristas from six independently owned cafes to rate sounds at work. All 15 rated the coffee grinder loud or very loud. Seven (47 percent) said the same of the espresso machine, and seven of furniture scraping and banging. Background music and conversations between staff were more often rated helpful than bothersome.
A 2025 laboratory study of a domestic bean-to-cup machine by Castellini and colleagues at the Politecnico di Milano found the grinding phase was the loudest part of the cycle, with its noise concentrated around 1 kHz, and that grinder vibration traveled into the machine’s frame through its supports. Commercial grinders differ, but the two findings carry over: grinding noise sits in the middle of the speech range, and part of it travels through what the grinder stands on.
Moves at the bar, in order of cost
- Time the loud jobs. Grind batch coffee, refill ice bins, crush ice and run the dishwasher before the morning rush or in a lull, not while the queue is longest.
- Turn the music down first. Rindel’s 2019 review of restaurant acoustics recommends background music at no more than about 60 to 65 dB, and 60 dB if conversation is to stay “satisfactory”. Music set high to cover the grinder ends up raising every voice in the room.
- Put felt glides on chairs and stools. Furniture scraping and banging was rated loud or very loud by nearly half the baristas in the Portland study. Glides are cheap; replace them when they wear or collect grit.
- Isolate what vibrates. Stand grinders and blenders on the feet or pads their makers specify, and avoid placing them on a hollow cabinet top or a thin shelf that can drum. Fix rattling panels, loose trays and drip trays that buzz.
- Move the loudest machine away from the seats. Where the workflow allows, put grinders and the blender at the end of the bar farthest from the tables where people stay, and keep them away from the order point.
- Choose quieter equipment at replacement time. Some commercial blenders are sold as reduced-noise models. Ask for noise information before you buy, and compare like with like.
- Listen during maintenance. A new rattle, whine or buzz is worth noting in the maintenance log and raising with your service technician, before it becomes part of the room.
Hearing orders across the counter
The order point is where noise costs you money directly: repeated orders, wrong drinks and a slower queue. Rindel’s distance table for conversation applies here. At about 1 meter, the distance across a typical counter, conversation stays “sufficient” only while the background is no more than about 71 dB.
- Keep the loudest machine away from the register. A grinder or blender beside the point of sale puts its burst right between barista and customer.
- Face the customer. In their laboratory study, Bottalico and colleagues note that people look at a talker’s lips to support what they hear, and that listeners with hearing loss may rely on lip reading more. A register placed so the barista turns away to the machine, or speaks from behind a tall espresso machine, removes that help.
- Treat the ceiling above the queue. Absorption over the customer side of the counter cuts the reflections that make the order point loud, without putting panels in the bar’s steam zone.
What the room can and cannot do for the bar
Absorption above and around the bar cuts the reflections that make machine noise seem to come from everywhere. It does not change the direct sound the barista hears from a grinder at arm’s length. That is why the bar moves above come first, and why the staff exposure section below matters even in a well-treated cafe.
Is the noise a risk for baristas?
The limited evidence so far says usually not: in a small US study that measured baristas’ full shifts, exposure stayed below workplace limits. But the margin is not large in a busy cafe, and long shifts eat into it.
The limits
- OSHA. Under 29 CFR 1910.95, the permissible exposure is 90 dBA averaged over 8 hours, with the allowed time halving for every 5 dB above that. At an 8-hour average of 85 dBA, the action level, employers must run a hearing conservation program, including monitoring, hearing tests, hearing protectors and training.
- NIOSH. The NIOSH recommended exposure limit is 85 dBA averaged over an eight-hour workday. NIOSH says workers exposed at or above it are at risk of significant hearing loss over a working lifetime.
- NIDCD. The National Institute on Deafness and Other Communication Disorders says sounds at or below 70 dBA are unlikely to cause hearing loss even after long exposure, while long or repeated exposure at or above 85 dBA can cause it.
What the barista study measured
In the Portland study, eight of the baristas wore personal dosimeters for three weekday shifts each, set to NIOSH criteria (an 85 dB criterion and a 3 dB exchange rate). Their shift-average levels ranged from 71 to 83 dBA, and their noise doses from 4 to 74 percent of the NIOSH daily limit. The authors concluded the baristas were not exposed above the regulatory criterion. They also found:
- Longer shifts meant higher doses, a moderate positive correlation in their data.
- Awareness was low. Baristas scored low on knowledge of noise hazards and rarely used hearing protection during noisy activities, though they were not opposed to hearing conservation.
- Other cafe data agreed. They cite a non-occupational noise database from the National Acoustic Laboratories and the HEARing CRC that lists cafes at 66.5 to 81.9 dBA over periods of half an hour to three hours.
The study is small: six cafes, fifteen baristas and eight dosimeters, all in one city. A busier cafe, a louder grinder or a double shift could push a dose higher.
What an owner can do
- Measure a full shift if your bar position reads in the 80s during grinding and steaming. A dosimeter, or a consultation with your insurer’s loss control team or an industrial hygienist, gives a real dose.
- Rotate tasks so one barista is not on the grinder and blender for the whole rush.
- Talk about it. The Portland finding was low awareness, not high exposure. A short conversation at onboarding costs nothing.
Where does absorption go in a small, low-ceiling cafe?
Put it on the ceiling over the seating first, then on the upper walls, and keep it out of the splash zone behind the bar. In a small room, every square foot of the ceiling you can treat matters, and the upper walls make up for the ceiling you cannot.
The ceiling first
The ceiling is the largest surface you can treat without anyone touching it. In a cafe it is often crowded, so plan around what is already there.
- Direct-mounted or close-hung panels suit ceilings of 9 to 10 ft, where a deep cloud would feel low. The 2010 ADA Standards require 80 inches of clear headroom over circulation paths (section 307.4), which a cloud hung a few inches below a 9 ft ceiling still leaves.
- Panels between the obstacles. Lay panels out in the open bays between lights, diffusers and sprinkler heads, never over a sprinkler head or in front of a diffuser. Your sprinkler contractor and fire official should review any hanging layout.
- Over the seats, not the bar. Put the most absorption over the tables where people stay, then over the queue. Leave the zone directly over the espresso machine and steam wands clear (see the section on finishes below).
- Exposed ceilings. Where the ceiling is an open deck with ducts, rows of hanging baffles or clouds between the services usually work better than trying to cover the deck.
The upper walls next
Wall area above head height is out of reach of shoulders, bags and coffee cups, and it faces the opposite wall, which is where flutter echoes start in a narrow room.
- Above about 5 ft on free walls, panels catch reflections without being bumped. In many cafes the long walls are taken by the bar and the storefront, so the end walls carry the wall panels, as in the plan below. Below 80 inches along a walkway, keep projection within 4 inches (ADA section 307.2); our ADA protrusion checker does the check.
- Opposite the storefront. You cannot treat the glass, so treat the wall it faces and the ceiling near it. If the wall it faces is the back of the bar, keep panels off it and treat the ceiling near the glass and the end walls instead.
- Felt and art. PET felt panels come in solid colors and cut shapes that suit a cafe’s look. Like other thin porous absorbers, thin felt works best in the mid and high frequencies, which is where speech sits and, in the laboratory study above, grinding noise too. Printed art panels can carry the menu art, a mural or the roaster’s photography on an absorptive core. Our article on acoustic art panels explains what to check before ordering printed ones.
How much absorption does a small cafe need?
Less than the size of the problem suggests, because the room is small. In the fictional example below, a 640 sq ft cafe with a 9 ft ceiling moves from 2.30 seconds of reverberation to 0.67 seconds with panels on half the ceiling and part of the upper walls.
The arithmetic
Reverberation time (RT60) is the time it takes sound to fall by 60 dB after it stops. Sabine’s formula estimates it as RT60 = 0.049 × V ÷ A, with V the volume in cubic feet and A the absorption in sabins (each surface’s area times its absorption coefficient). A small volume means a small numerator, so each sabin you add moves the result further than it would in a big room.
Example (fictional). Not a Fibson project and not a real cafe. A 24-seat cafe, 32 by 20 ft with a 9 ft ceiling, volume 5,760 cu ft. Mid-frequency (500 to 1,000 Hz) coefficients are planning assumptions, not test results.
| Surface or panel group | Area (sq ft) | Coefficient | Sabins |
|---|---|---|---|
| Floor, sealed concrete | 640 | 0.02 | 12.8 |
| Ceiling, painted gypsum board | 640 | 0.05 | 32.0 |
| Storefront glass | 160 | 0.12 | 19.2 |
| Walls, painted gypsum board and tile | 776 | 0.05 | 38.8 |
| Counter, stools, tables (allowance) | 20.0 | ||
| Total now | 122.8 | ||
| 20 ceiling panels, 4 by 4 ft, over the seating | 320 | net 0.75 | 240.0 |
| 10 upper-wall panels, 2 by 4 ft | 80 | net 0.75 | 60.0 |
| Total with panels | 422.8 |
Now: RT60 = 0.049 × 5,760 ÷ 122.8 = 282.24 ÷ 122.8 = 2.30 seconds. Ceiling panels only: 282.24 ÷ 362.8 = 0.78 seconds. Wall panels only: 282.24 ÷ 182.8 = 1.54 seconds. Both: 282.24 ÷ 422.8 = 0.67 seconds. Panels are assumed at 0.80, replacing gypsum at 0.05, so each square foot adds a net 0.75.
Three points stand out:
- The ceiling still does most of the work. Half the ceiling alone takes the room from 2.30 to 0.78 seconds. The wall panels alone reach only 1.54 seconds.
- Absorption per seat is what crowds respond to. Rindel’s research ties crowd noise to the absorption available per person, not to reverberation time alone. The fictional cafe ends with about 17.6 sabins per seat (422.8 ÷ 24). The site’s fictional 60-seat example dining room, with its full panel plan, has about 11.0 (662.8 ÷ 60).
- Small rooms are outside the crowd models. Rindel warns that his prediction model for crowd noise may not apply to rooms holding fewer than about 30 people. In a 24-seat cafe, use the reverberation estimate and your own peak readings, not a predicted crowd level.
No code sets a reverberation target for cafes, so any target is a planning choice. Lower is better for conversation and for a steady background for laptop workers. You can run your own room through our reverberation time calculator and turn a target into a panel count with the panel quantity calculator.
What to expect after treatment
The clearest change is in the empty and half-full room: the clap dies away quickly, and conversation at the next table stops carrying. At peak, expect a lower and steadier background rather than quiet. In larger rooms, Rindel’s model predicts that each doubling of absorption takes about 6 dB off crowd noise at the same occupancy, but it is not designed for rooms this small, so measure before and after with the same routine. Machine bursts at the bar change least, because the barista hears them directly.
Do rugs, plants and curtains help?
They help a little, in specific places, and none of them replaces the ceiling.
- Rugs soften footfall and chair noise where they lie, but in a cafe they collect spills and grit, and thin floor coverings do little for reverberation. In a 2005 feature for the Acoustical Society of America’s magazine, consultant Marshall Long put it plainly: “carpeting or other thin materials do very little.”
- Plants add character and break up sight lines, but do not count them as absorption. The US General Services Administration’s office acoustics guide, Sound Matters, lists plants as a noise myth: “it would take a veritable jungle of plants to absorb much sound.”
- Curtains on a side window add some absorption, but in the 2021 IBC text, fabric hangings in assembly and business occupancies count as decorative materials and, with some exceptions, may not exceed 10 percent of the wall or ceiling area they hang on.
A note on thickness
Thin porous panels absorb speech-range sound far better than low hum. In Owens Corning’s data sheet for its 700 Series fiberglass board (ASTM C423, mounted against a solid backing), the 1 inch unfaced board absorbs 0.05 at 125 Hz against 0.88 at 1,000 Hz; the 4 inch board reaches 0.56 at 125 Hz. So thin panels do little for the hum of refrigeration, compressors and a bass-heavy sound system. If the room booms or hums, the low end needs thicker panels or an air gap behind them, and the source (a noisy compressor, a subwoofer) is usually the cheaper fix.
Which finishes survive steam, milk and hands?
Keep absorptive panels out of the bar’s working zone, choose finishes that can be vacuumed and spot-cleaned for the customer side, and mount panels where splashes and shoulders cannot reach them. The FDA Food Code draws the line between food preparation areas and consumer areas.
What the Food Code says
The FDA Food Code is a model code; your state or local health department enforces the edition it has adopted. In the 2026 edition:
- “Food” includes beverages and ice, so the bar where drinks are made is a food preparation area.
- Section 6-101.11 requires indoor floor, wall and ceiling surfaces to be smooth, durable and easily cleanable where food operations are conducted, and nonabsorbent in areas subject to moisture, such as food preparation and warewashing areas.
- Section 6-201.17 requires wall and ceiling attachments, including decorative items, to be easily cleanable, but allows wall and ceiling surfaces and decorative items provided for ambiance in a consumer area to skip that requirement if they are kept clean.
- The code’s definition of “easily cleanable” is tiered, contrasting a utilitarian attachment in the kitchen with a decorative attachment in the consumer dining area.
- Section 6-501.12 asks that routine cleaning happen when the least food is exposed, such as after closing.
In practice: fabric, felt and wood panels belong on the customer side of the counter. Behind the bar, where steam, milk and water are part of the job, surfaces must be nonabsorbent. Ask your health inspector before putting any panel on the staff side of the counter.
Practical rules for cafe finishes
- Keep panels out of the steam plume. Steam from the wands and the dishwasher rises and drifts. Leave the ceiling directly over the espresso machine clear, and start ceiling panels a few feet out on the customer side.
- Mount above splash and shoulder height. On walls next to the condiment station, the pickup counter or stool seating, start panels above the height where cups, elbows and backpacks land.
- Pick fabrics the maker says can be vacuumed and spot-cleaned, and write their care instructions into your cleaning schedule. Vacuum panels after closing, when no food is out.
- Check the fire documents. The International Building Code treats paneling applied for acoustical correction as interior finish (section 806.2 in the 2021 model code, as printed in Seattle’s adopted code), so panels must meet the flame spread class your occupancy requires. The local building official decides which edition applies. Our page on materials and safety explains how to read the fire and absorption reports behind a panel.
How do you zone a cafe for laptops and groups?
Give each group its own part of the room: chatty tables near the door and the counter, quieter tables at the far end under the most absorption, and music set low enough for both. Zoning does not reduce total noise, but it puts the people who mind it most where it is lowest.
Zoning moves
- Groups near the door and the counter. That end is already livelier from the queue, the door and the bar. People in groups mind it less.
- Laptops and solo seats at the far end. Put the outlets there too; where the power is decides where laptop workers sit.
- The most absorption over the quiet end. In the fictional plan above, both seating zones get ceiling panels and an end wall of upper-wall panels; the quiet zone gets the larger ceiling area and the longer run of wall panels.
- Bar stools facing the window, not the grinder. A counter along the storefront keeps solo customers away from the bar and faces them toward the glass, where the ceiling near the window should be treated.
- Music at one written level. Rindel’s suggested maximum of 60 to 65 dB for background music suits a cafe. Set it at peak and write the setting down for every shift.
Why laptop workers and groups pull in different directions
Rindel’s model counts crowd noise by the number of people talking at once. A room full of solo laptop workers has few talkers and stays fairly quiet; the same room full of pairs and groups has many more. The cafe’s mix changes through the day, and SoundPrint’s chain readings also varied by hour. Plan the room for the noisiest mix you regularly see, not the quietest.
Booth seating and table spacing change things further. Our sibling article on table layout and noise covers what research says about seating arrangements in dining rooms, and much of it applies to cafes.
Mistakes cafes make with noise
Six patterns come up again and again in small, hard cafes. Each one wastes money or effort.
- Turning the music up to cover the grinder. The music then raises every voice in the room, and the grinder still comes through in bursts. Time and place the grinder instead, and keep the music low.
- Putting panels where they are easy rather than where they work. A single feature wall behind the counter looks like action but often sits in the splash zone, over the staff, and covers little of the room. The ceiling over the seats does more.
- Treating a booming room with thin felt. Thin felt helps with chatter and clatter but not with low hum. If the problem is a compressor or a subwoofer, fix the source.
- Ignoring the floor and furniture. Hard chair legs on concrete are a constant, sharp source. Glides cost less than any panel.
- Buying panels by looks alone. Ask for the absorption test report behind any panel, with the test method (ASTM C423 in the United States), its edition and the mounting type. A felt tile glued flat to a wall and the same felt hung as a baffle are tested differently, and a printed panel should be tested with its print fabric.
- Expecting panels to keep sound in. Absorption reduces echo and crowd build-up inside your cafe. It does not stop noise traveling to the apartment above or the shop next door; that is a construction question about walls, floors and ceilings.
A cafe noise plan you can run this month
Work through these steps in order. The first four cost little or nothing; the rest give you the numbers for a panel plan.
- Week 1: measure. Take dBA readings at the far table, the bar and the queue, at a quiet hour and at your busiest hour. Clap once in the empty room before opening.
- Week 1: fix the cheap things. Set and write down a music level for peak. Add felt glides. Move batch grinding, ice refills and dishwasher cycles out of the rush.
- Week 2: rearrange. Put groups near the door and counter, laptop seats and outlets at the far end.
- Week 2: measure again. Compare peak readings at the far table. What remains is mostly the room.
- Week 3: survey the room. Measure length, width and ceiling height. Photograph the ceiling with every light, diffuser and sprinkler head visible, and every wall. List the finishes.
- Week 3: run the numbers. Use the reverberation time calculator for today’s estimate and decide on a target, then the panel quantity calculator for a first count.
- Week 4: sketch the plan. Mark ceiling panels over the seating, clear of the bar’s steam zone and the sprinkler heads, and upper-wall panels on the free walls, away from the bar.
- Before ordering: check documents. Ask for the absorption and fire test reports behind any panel, with the test method, edition and mounting type, and the fabric maker’s cleaning instructions.
Our restaurant acoustics checklist covers the same surfaces and sources on one page, and the restaurants, cafes and bars page shows what a hospitality panel plan usually includes. For the mechanism behind crowd noise, read why restaurants get louder as they fill. Fibson designs and makes acoustic panels to order and plans each room before anything is ordered; if you would like a second look at your numbers, send us your cafe with its dimensions, photos and peak-hour seat count.
