Fibson homePlan my room
Menu

Does table layout change how loud a restaurant gets?

Restaurant table layout noise explained: how table size, spacing, booths and zoning change loudness and conversation at equal covers, and where absorption goes.

Felt pea pods laid apart on an oat cloth, most holding two or four saffron peas, and one long pod crammed with ten peas pressed together.
Reader question
At the same number of covers, how do table spacing, booths and zoning change noise and conversation?

At the same number of covers, table layout changes how loud a restaurant gets less than the room’s absorption does, but it changes a lot about who can hold a conversation and who overhears whom. Larger, shared tables talk more; small tables keep conversations at short range; booths and high backs shield the next table; and zoning keeps loud parties away from quiet ones. Layout works best when the ceiling absorption is placed over the densest seating.

This article is for owners, designers and architects drawing a floor plan. It translates the small body of research on dining style, table size and spacing into decisions you can mark on a plan, and it is honest about how thin that research is. It does not repeat the order of fixes for an existing loud room, which is in our guide on how to make a loud restaurant quieter, or the mechanism of the noise loop and acoustic capacity, which is in why restaurants get so loud.

Does table layout change how loud a restaurant gets?

Yes, but mostly through how many people talk at once and how close they sit, not through any shielding of the room as a whole. Layout is a set of smaller levers that decide where noise concentrates and how well each table copes with it.

The overall noise in a dining room comes mainly from guests talking, and it depends on the room’s absorption, the number of people and how many of them speak at once. Rindel’s 2019 review in Acoustics in Practice puts this in one equation, with a “group size” term: the average number of people per active talker. Layout touches that term directly. A table of two usually has one talker at a time; a table of six can have one, two or three.

Layout lever Changes the room’s overall level? Changes conversation at each table? Changes privacy between tables?
Table size mix Somewhat, through how many people talk at once Yes, through talking distance Somewhat
Spacing between tables Little, at the same covers Little Yes
Booths and high-backed banquettes Little Somewhat, for the seated party Yes, for the next table
Zoning loud and quiet groups Little overall Yes, locally Yes
Seat count Yes, about 6 dB per doubling Yes Yes
Ceiling absorption over the seats Yes, the largest single effect Yes Can reduce privacy if overdone

The last row is not a layout choice, but it decides how much the others can do. In a hard room, the background swamps every table whatever the plan.

What the research says about dining style and table size

The main field study on this question compared three ways of eating, not three floor plans, and found that how a table shares food changed how much people talked and how loud the room got. It is one study of six restaurants in China, so treat its numbers as indications.

The Meng, Zhang and Kang study

Meng, Zhang and Kang (2017), published in Building and Environment, measured sound levels, counted diners and surveyed guests in six restaurants chosen from a preliminary survey of 523 Chinese restaurants. The rooms were similar in size (910 to 1,208 cubic meters) and all had an unoccupied reverberation time of about 1.6 seconds, so the room acoustics were held roughly constant. The researchers compared three “dining styles”:

  • Centralized: diners share one dish, such as a hot pot.
  • Separate: each diner eats from their own plate.
  • Dispersed: diners share many dishes.

Three findings matter for a floor plan.

  1. Bigger tables talk more. Conversation took up the largest share of the time at tables of five or six people, reaching 81.5 percent at centralized tables of five with music playing. Averaged across table sizes with music, conversation filled 69.8 percent of the time at centralized tables, 65.6 percent at dispersed tables and 58.0 percent at separate tables.
  2. Shared-food tables were louder. At the same crowd density with background music, the centralized restaurant measured 2.5 dBA higher than the separate one and 2.0 dBA higher than the dispersed one. Without music, at a density of 0.25 diners per square meter, the centralized and dispersed restaurants were 4.4 and 3.8 dBA louder than the separate one.
  3. Density drove the level everywhere. As crowd density rose from 0.05 to 0.25 diners per square meter, sound levels rose by 3.3 to 6.2 dBA depending on the restaurant.

How many people talk at once at each table size

Before measuring, the Meng team recorded who talks at tables of different sizes. At a table of two or three, one person speaks while the others listen. At four or five, there may be one speaker or two speaking at once to different listeners. At six, one to three people may be talking at the same time. Rindel’s own data point the same way: across the restaurants and canteens he analyzed, a group size of 3 to 4 people per active talker was typical, and in one canteen the group size moved from about 4 early in the lunch to about 3 later, as more people talked. A layout with many large tables raises the number of simultaneous talkers, and each extra talker adds to the background.

Translating the density figures

The study’s densities are low by American standards. One diner per square meter equals one per 10.8 sq ft, so the study’s range of 0.05 to 0.35 diners per square meter means from about 215 sq ft per diner down to about 31. The site’s fictional 60-seat example dining room, full, has about 20 sq ft of floor per diner (1,200 sq ft ÷ 60), denser than anything the study measured.

The study also found that the share of diners who heard other people’s speech rose fastest as density increased up to about 0.15 diners per square meter, roughly 72 sq ft per diner. Above that, the authors write, “privacy derived from distance disappeared.” In a dining room seated at 20 to 30 sq ft of floor per diner, like the example room, distance alone stops protecting privacy well before the room fills.

What the study does not tell you

  • It compared ways of eating, not floor plans. A hot pot table and a plated table differ in food, social style and price as well as acoustics.
  • Six rooms, one country. The authors note that European restaurants are often a third to a quarter the size of the Chinese rooms they studied, which changes reverberation, and that price level and music style may change behavior.
  • The manuscript is inconsistent on one point. Its abstract and conclusions say tables of four or more increased conversation, while one sentence in the results says the opposite. The measured figures support the abstract.

Two-tops, four-tops or big rounds?

At the same number of covers, small tables and four-tops come out about even for conversation, and big round tables come out worst for talking across the table. Smaller tables put more talkers in the room but keep each conversation short-range; the two effects roughly cancel.

Rindel’s equations make the trade visible. The background level rises with the number of people talking at once, and the quality of a conversation depends on the gap between your companion’s voice and that background (the signal-to-noise ratio). That gap improves by about 3 dB each time the talking distance shrinks by a factor of about 1.4, for example from 1.0 to 0.7 meters, and by about 6 dB when the distance halves. Rindel lists typical talking distances of 0.7 meters across a table for two, 1.0 meter across a square table for four, 1.4 meters across a round table for six and 2.0 meters across a round banquet table for ten, with 0.5 meters to the person beside you. Our article on why restaurants get so loud sets out the background level each distance can tolerate.

Example (fictional). Not a Fibson project. The site’s fictional 60-seat example dining room (40 by 30 ft, 11 ft ceiling, 373.8 cubic meters) with its full panel plan, 0.98 seconds of reverberation, full at 60 guests. Rindel’s equations 3 and 4: absorption A = 0.16 × 373.8 ÷ 0.98 + 0.35 × 60 = 61.0 + 21.0 = 82.0 square meters; signal-to-noise = 10 × log10(2 × A × g ÷ (16 × π × r² × N)), with g the people per talker, r the talking distance in meters and N = 60. We assume one talker per table at any moment, so g equals the table size. These are model results with Rindel’s stated uncertainty of about ±3 dB, not measurements.

Layout of 60 covers People per talker (g) Distance (r) Predicted background Signal-to-noise
30 two-tops 2 0.7 m 84.3 dB −6.5 dB
15 four-tops 4 1.0 m 78.2 dB −6.6 dB
10 rounds of six, across the table 3 (two talkers per table) 1.4 m 80.7 dB −10.8 dB
6 rounds of ten, across the table 3.3 (three talkers per table) 2.0 m 79.8 dB −13.4 dB
6 rounds of ten, to the neighbor 3.3 0.5 m 79.8 dB −1.4 dB

Working the four-top row: 2 × 82.0 × 4 ÷ (16 × 3.1416 × 1.0 × 60) = 656 ÷ 3,016 = 0.218, and 10 × log10(0.218) = −6.6 dB. Rindel grades −3 dB or better as “sufficient”; below that, conversation is “insufficient”.

Predicted conversation margin by table type at 60 covers in the fictional example roomHorizontal bars of predicted signal-to-noise ratio in decibels, on a scale from minus 15 to 0. Two-tops at 0.7 meters: minus 6.5. Four-tops at 1.0 meter: minus 6.6. Rounds of six across the table: minus 10.8. Rounds of ten across the table: minus 13.4. Rounds of ten talking to the neighbor at 0.5 meters: minus 1.4. A dashed line at minus 3 marks the edge of sufficient conversation; only the neighbor conversation passes it. Sufficient: −3 dB or better Two-tops, 0.7 m −6.5 dB Four-tops, 1.0 m −6.6 dB Rounds of six, across −10.8 dB Rounds of ten, across −13.4 dB Rounds of ten, neighbor −1.4 dB −15 −10 −5 0 Predicted signal-to-noise at the table, dB (longer bar is better)
Fictional example data for illustration: the site's 60-seat example dining room with its panel plan (0.98 s), full at 60 guests, computed with Rindel's 2019 equations 3 and 4 (directivity 2, 0.35 square meters of absorption per person) and assumed talkers per table; uncertainty about ±3 dB. Not a Fibson project and not a measurement.

What the comparison means for a floor plan

  • Two-tops are louder rooms, not worse rooms. A room of two-tops has more people talking at once, so its background is predicted about 6 dB higher than a room of four-tops. But each pair sits closer, so conversation quality ends up about the same. Guests may describe the two-top room as louder and still hear each other as well.
  • Big rounds split into neighbor conversations. At a round table for ten, talking across the table is hopeless in a busy room, as Rindel also notes; guests end up talking to the person beside them. If the party wants to talk across the table, a long rectangular table (Rindel puts the distance across one at about 1 meter) or two smaller rounds work better than one big round.
  • The table type does not rescue a hard room. Every row in the example is below “sufficient” at a full house except neighbor-to-neighbor talk. In this model, the room with its panel plan keeps two-tops and four-tops at “sufficient” up to about 22 guests; at half occupancy (30 guests) both come out near −4 dB, just short of it. Absorption and the number of guests set the ceiling; table size decides how close each party gets to it.

Communal tables and counter seats

Two seating types deserve a separate note.

  • Communal tables put strangers at shoulder distance. Acoustically they behave like a row of neighbor conversations, which hold up better than cross-table talk in a busy room, but they offer no privacy. They are also unpopular with some guests: in Zagat’s 2018 Dining Trends survey of nearly 13,000 diners, 33 percent named sitting at communal tables as a deal breaker.
  • Counter and bar seats seat pairs side by side, at about 0.5 meters. In Rindel’s terms that is the most forgiving distance in a loud room. A counter facing the kitchen pass, though, puts guests next to the clatter of plating; facing a wall or window is quieter.

How far apart should tables be?

Far enough that the next table’s words are unintelligible, which in a busy room happens sooner than most designers expect. Spacing matters most for privacy, not for overall loudness, and a room that is too dead can make privacy worse.

Long’s spacing rule

In his 2005 feature for the Acoustical Society of America’s magazine, Acoustics Today, consultant Marshall Long set two conditions for a good restaurant: enough absorption that guests can talk across their own table, and enough background that they cannot follow the next table. He defines privacy as a signal-to-noise ratio below −9 dB at the neighboring table. With a highly absorptive ceiling and tables spread evenly, his analysis gives:

  • a minimum spacing between tables of about 2.5 meters (8 ft), with the tables spread evenly through the room;
  • at least 6.3 square meters (68 sq ft) of absorption per table for conversation at 1 meter; and
  • no more than about 20 square meters (215 sq ft) of absorption per table at that spacing, or the room becomes so quiet that neighbors are overheard.

In his worked example, the direct sound of a conversation at a table 3 meters (10 ft) away arrives at about 54 dB, well below the 66 dBA background in that example, so it is not understandable. Long notes that the privacy condition is usually easy to meet in practice; the conversation condition is the hard one.

A spacing check on the example room

Suppose the fictional 1,200 sq ft example room is set with 15 four-tops. Each table then has about 1,200 ÷ 15 = 80 sq ft of floor, which on an even grid puts table centers about 8.9 ft (2.7 meters) apart, just over Long’s 2.5 meter guide. Set the same 60 covers as 30 two-tops and each table has 40 sq ft, with centers about 6.3 ft (1.9 meters) apart, inside Long’s guide. The two-top room will feel more overheard at a full house, even though, as the comparison above shows, each pair hears its own conversation about as well. These are even-grid simplifications; aisles, the bar and service stations take floor area, so real spacing is tighter.

Music and privacy

Some background sound is useful. Rindel notes that background music can mask nearby conversations, so a private conversation is not easily overheard, and that people may stop talking when the music stops. In the Meng study, guests talked slightly more when background music played (by 1.0 to 3.2 percentage points), and the authors suggest diners felt more private. Above about 0.23 diners per square meter, though, music lowered rated comfort. Keep music as a quiet bed, not a cover for a hard room; Rindel suggests 60 to 65 dB at most.

Spacing and the code

The building code sets a floor on space per person for exits, not for comfort. In the 2021 International Building Code, as printed in Seattle’s adopted code, Table 1004.5 allows one occupant per 15 net sq ft for unconcentrated assembly areas with tables and chairs, and one per 5 net sq ft for standing space. A layout can satisfy the egress count with ease and still be far beyond what conversation can handle. Your local building official decides which edition and figures apply.

Do booths and high-backed banquettes help?

They help the people sitting in them and the next table over, by blocking the direct path between neighboring conversations. They do little for the room’s overall level, and they work only if the ceiling above them absorbs sound.

How a booth works acoustically

A seated conversation reaches the next table two ways: directly, in a straight line, and by reflection, mostly off the ceiling and nearby walls. A high booth back interrupts the direct path between two booths. It cannot stop the reflection off a hard ceiling above, which arrives over the top of the back. Over a hard ceiling, a booth mostly changes the view; over an absorptive ceiling, it also changes what the next table hears.

There is little published restaurant research on booths. Office acoustics guidance is the nearest evidence, and it points the same way. The US General Services Administration’s Sound Matters guide lists absorptive ceilings and walls alongside sound-shielding barriers with an absorptive face (NRC 0.8 minimum) for open work areas, and gives 48 inches as the minimum partition height for seated privacy in one category of space. Offices are not dining rooms, but the physics of a seated listener behind a barrier is the same.

Practical booth rules

  • Backs above seated head height. A back that stops at shoulder height shields little. Taller backs, or a low screen on top, block the direct path between seated heads.
  • Absorptive, upholstered backs. A hard, glossy booth back reflects the conversation back into the booth and down the row. Upholstered or fabric-faced backs absorb some of it.
  • Absorption overhead. Put clouds or baffles above booth rows so the ceiling path is absorbed too.
  • Mind accessibility. Fixed booths rarely work for wheelchair users. The 2010 ADA Standards require at least 5 percent of seating spaces at dining surfaces to be accessible (section 226.1), dispersed throughout the space (section 226.2), with surfaces 28 to 34 inches high (section 902.3). Make sure the quiet zone includes accessible tables, not only booths.

Banquettes along a wall

A banquette puts guests with their backs to a wall, and a hard wall a few inches behind a head returns every word at once. That reflection is part of why wall seating can feel louder than a table in the middle of the room. Fabric-wrapped wall panels behind banquettes, centered near seated ear height and kept within the ADA’s 4 inch projection limit along walkways (section 307.2), absorb the reflection where it starts. On a long banquette wall, panels can alternate with art or mirrors; a run that is partly absorptive still does more than one that is hard from end to end.

How do you zone a dining room by noise?

Group the loud uses together and keep the quiet tables away from them: the bar, the large parties, the kitchen pass and the service stations at one end or side, and the two-tops and booths at the other. Zoning does not lower the room’s total noise, but it changes who sits in the loudest part.

Zones to plan for

Zone What makes it loud Where to put it What to pair it with
Bar and standing area Standing guests, music near the bar, glassware One end, near the entrance The most ceiling absorption in the room
Large parties and rounds Several talkers per table, more conversation Next to the bar or in a separate alcove Absorption overhead; separate speaker zone
Kitchen pass and service stations Plates, ticket calls, bus tubs Away from the quiet zone Absorption on the dining side; rubber mats
Entrance and host stand Door, street noise, waiting guests Buffered by the bar zone Ceiling treatment near the glass
Quiet zone Two-tops and booths Far end, away from the pass Accessible tables included; lower music level

Service paths, the pass and the door

Noise in a dining room is not only voices. The kitchen pass, bus stations, the dish return and swinging doors make sharp, frequent sounds, and the servers’ main path carries them through the room. The Meng paper cites earlier Chinese research finding that a restaurant with its kitchen inside the dining room usually has a higher sound level than one with the kitchen adjacent. On a plan, that suggests three moves: keep bus stations and the dish return off the main path past quiet tables, orient the pass so it opens toward the loud zone, and keep the entrance door away from the quiet zone, where each opening lets street noise and cold air in.

Private rooms and alcoves

The strongest zoning tool is a real wall. A private dining room, or an alcove with a partial wall and its own ceiling treatment, takes a large party’s talkers out of the shared background entirely. Rindel’s banquet measurements covered three separate halls at the same event and found levels of 83 to 87 dB in each, set by each hall’s own volume, reverberation time and number of guests. Large parties in a separate room make their own noise and keep it. If the plan can afford one enclosed room for parties of eight or more, it will do more for the main dining room than any rearrangement of tables.

Why zoning works

Meng’s finding that larger tables talk more, and Rindel’s group-size term, say the same thing: large parties put more talkers per square foot into the room. Seating them together, near the bar, concentrates the loudest sources where guests expect energy. GSA’s office guidance makes the same planning point in its own terms: locate incompatible functions apart from each other.

Zoning has limits. In a single open room, the reverberant background is shared, so the quiet end is quieter mostly because it is farther from the direct sound of the loudest tables. Separate speaker zones for the music, a step in the ceiling or a partial wall between zones each help more than distance alone. Bars and taprooms raise their own problems with standing crowds and hard finishes; see our guide to bar and taproom acoustics.

A zoned plan of the fictional example dining roomPlan of a rectangular dining room, not to scale. The entrance and storefront glass are on the left wall. A row of booths with high backs runs along the top wall. Two-tops fill the quiet left half. Large round tables sit in the right half next to the bar, which runs along the right wall. The kitchen pass is on the bottom wall at the right. A darker shaded zone marks more ceiling absorption over the groups and the bar; a lighter zone marks less over the two-tops and booths. Door Booths, high backs Quiet two-tops Groups near the bar Bar Kitchen pass More ceiling absorption: groups, bar, pass Less ceiling absorption: booths and two-tops High booth backs Storefront glass
Fictional example layout for illustration, not to scale and not a Fibson project: the site's 40 by 30 ft example dining room re-planned into zones. Absorption weighting follows Long's per-table rule (Acoustics Today, 2005) and Rindel's group-size term (Acoustics in Practice, 2019).

Where should ceiling absorption go in a zoned room?

Put the most absorption over the densest and loudest seating, and enough over the quiet zone that its tables can talk. An even grid of panels across the whole ceiling treats a zoned room as if every table were the same, which it is not.

Allocate by table, then by zone

Long’s figure of about 68 sq ft of absorption per table for 1 meter conversation gives a simple way to think about allocation: count the tables, and the talkers, under each part of the ceiling. A zone of large parties near the bar has more talkers per square foot than a zone of two-tops along a wall, so it needs more absorption overhead to give its tables the same chance.

Example (fictional). Not a Fibson project. The site’s example plan has 16 ceiling clouds, 4 by 4 ft, laid in rows over the tables (256 sq ft at a planning coefficient of 0.90, 230.4 sabins). Suppose the owner re-plans the room into zones: 24 covers at rounds and four-tops near the bar, 8 covers in booths, and 28 covers at two-tops in the quiet half. If the bar half of the ceiling holds 10 of the 16 clouds and the quiet half holds 6, the cloud absorption splits as 10 × 16 × 0.90 = 144.0 sabins over the bar half and 6 × 16 × 0.90 = 86.4 sabins over the quiet half. The total stays 230.4 sabins, so the room’s Sabine estimate does not change (0.98 seconds with all three panel groups). What changes is where the absorption sits relative to the talkers. The coefficient is a planning assumption, not a test result.

Sabine’s formula treats the room as one well-mixed space, so moving panels around does not change its estimate. In a long or L-shaped room, or one with zones under different ceilings, the sound field is not well mixed, and placement matters more than the single number suggests. Rindel notes that irregular spaces may need a computer model instead of the simple equations. That is one of the decisions an acoustic design service works through on a ceiling plan.

Which ceiling products suit which zone

  • Clouds over table rows suit finished dining rooms with ceilings of about 9 to 14 ft. See ceiling clouds.
  • Baffles over the bar and large-party zone suit high or exposed ceilings, and their rows can follow the bar. See ceiling baffles.
  • Wall panels at seated ear height behind banquettes and along booth rows add absorption exactly where the quiet zone’s guests sit.

Hanging panels must leave 80 inches of headroom over walkways (ADA section 307.4) and be coordinated with sprinkler heads, lights and diffusers.

How to test a layout before you build it

You can test zoning in an existing room on a slow night, and you can mock up a new plan with tape and borrowed tables before the millwork is ordered. The test is the same: measure where the guests will sit, not only in the middle of the room.

  1. Mark the zones on the floor plan, and pick one measurement spot at seated head height in each.
  2. Log readings at peak in each zone with a sound level meter app set to A-weighting, with the music at its usual setting. Note the guest count in each zone.
  3. Rearrange one thing at a time. Move the large parties next to the bar, or the two-tops to the far end, and log again on a similar night.
  4. Ask the quiet-zone guests. A two-question card (could you hear your table, could you hear the next one) tells you more than a decibel figure about privacy.
  5. Keep the music constant between test nights, or you will measure the sound system instead of the layout.

Example (fictional). These readings are invented to show the method, not measurements of a real room. A 70-seat restaurant logs two Saturdays at about 60 guests. On the first, large parties are spread through the room; on the second, they are seated next to the bar and the two-tops are moved to the far end.

Zone First Saturday Second Saturday
Bar end 79 dBA 81 dBA
Middle of the room 78 dBA 77 dBA
Far end (two-tops) 77 dBA 74 dBA

The total crowd barely changed, and the bar end got louder, as expected. The far end dropped 3 dB because the loudest tables moved away from it. That is what zoning can do in one open room: a few decibels where it matters, not a quieter room overall.

What layout cannot fix

Layout cannot make a hard room comfortable at a full house. Every table type in the fictional example falls short of “sufficient” at 60 covers, even with the panel plan; only neighbor-to-neighbor conversation passes. A floor plan moves the problem around; absorption, music level and guest count set its size.

Three limits to keep in mind

  • The reverberant background is shared. In one open room, the far end hears less of the loudest tables’ direct sound, but it shares the same reverberant level. Zoning works better with partial walls, ceiling steps or separate rooms.
  • More spacing rarely survives the business plan. Removing a third of the tables would help, but most owners will not. Rindel’s suggestion is to keep the seat count no more than 25 percent above the room’s acoustic capacity; layout decides how those seats are grouped. In the fictional example room, the panel plan gives an acoustic capacity of about 19 guests, so Rindel’s guide would point to about 24 seats. At 60 seats the room runs at about three times its capacity, which is why no table type in the comparison reaches “sufficient” at a full house.
  • Older guests need more margin. Bottalico and colleagues found that adults over 60 kept vocal effort low and understanding high when background noise stayed below 50 dB(A). A quiet zone with booths and two-tops under extra absorption is the layout answer for regulars who need it, but it cannot reach that level in a busy room.

For the full order of fixes in a room that is already open, see our guide on how to make a loud restaurant quieter.

A layout checklist for your next floor plan

Use this list while the plan is still on paper, when moving a table costs nothing.

Questions to ask your designer

  • Where will the largest parties sit on a full Saturday, and what is above them?
  • How many people per table will be talking at once in each zone?
  • How far apart are table centers in the busiest zone, and does that meet Long’s 2.5 meter guide?
  • Which walls behind seated guests are hard, and which can carry absorption?
  • Are the bus stations, the pass and the door away from the quiet tables?
  • Where are the accessible seats, and are they in every zone?

The checklist

  1. Count talkers, not only covers. List each table type and its likely talkers at once. Large parties and shared-dish tables talk more.
  2. Choose talking distances. Favor two-tops and four-tops where guests come to talk. For groups, use long rectangular tables or two smaller rounds instead of one big round, so guests can talk across the table.
  3. Draw the zones. Bar, large parties, the kitchen pass and service stations together; two-tops and booths at the far end; the entrance buffered by the bar.
  4. Specify booth backs. Above seated head height, with upholstered or fabric faces, and absorption overhead.
  5. Weight the ceiling plan. More absorption over the loud zone, enough over the quiet zone, none over a sprinkler head.
  6. Keep accessible seats in every zone. At least 5 percent of seats at accessible dining surfaces, dispersed through the room.
  7. Set the music by zone. A quieter level over the quiet zone, and no more than about 60 to 65 dB anywhere when you want conversation.
  8. Check the numbers. Estimate the reverberation time, compare your seat count with the room’s acoustic capacity, and see the fictional example room for how panel groups change the estimate.

The restaurant acoustics checklist covers surfaces and sources, and the restaurants, cafes and bars page shows what a dining room panel plan usually includes. Fibson designs and makes acoustic panels to order and plans each room before anything is ordered; if you would like your floor plan and ceiling plan read together, send us the plan with your seat count and table mix.

Working on a room like this?

Send the size, a few photos and what happens in the space. We reply with questions or an outline of the panel plan.

Plan my room