Fibson homePlan my room
Menu

Acoustic panels for a home theater vs a living room

Home theater acoustic panels can follow the speaker layout toward a reference room. A living room needs fewer, decor-led panels. How to plan each.

A felt film reel lying on a round rug beside a small basket of yarn balls.
Reader question
How should panel choice and placement differ between a dedicated home theater and a living room that also hosts movie nights?

A dedicated home theater and a living room that hosts movie nights need different panel plans. A theater can be treated as a playback room: symmetrical around the speaker layout, with absorption at the side-wall first reflection points, behind the seats, in the corners and often on the ceiling, working toward the dry conditions of a reference listening room. A living room needs fewer, decor-led panels at the two or three spots that matter most, enough to tame echo and steady the dialogue, and not so many that the room feels muffled when people talk. For a sense of scale, the reference listening room in ITU-R BS.1116 works out to about a quarter of a second of reverberation at home-sized volumes, and a living room should stop well short of that.

This article covers rooms where loudspeakers play films, games and music. For a room used mainly for talking, see where to put acoustic panels for speech; for echo across a whole open-plan floor, see why open-plan homes echo.

Two rooms, two briefs

A dedicated theater has one job and fixed seats, so it can be planned like equipment. A living room has many jobs and moving people, so it has to be planned like a room that happens to have speakers in it.

Question Dedicated home theater Living room with movie nights
Main use Playback to fixed seats Conversation and family life, sometimes films
Seating Fixed, often in rows A sofa, often pushed against a wall
Symmetry Can be built symmetrical Usually lopsided: glass, a fireplace, an open side
How dry Toward a reference listening room Drier than now, much wetter than a theater
Panel count Many: walls, corners, often ceiling A few, at the spots that matter most
Look Dark fabric is fine Panels have to work as decor
Ceiling Absorb, unless speakers bounce sound off it Usually left alone
Bass Deep corner absorbers, seat and subwoofer placement, calibration Mostly placement and calibration

The rest of this article takes each column in turn. The common thread is the same in both rooms: find where sound from the speakers bounces once on its way to a listener, and decide how much of that bounce you want to keep.

How dry should a playback room be?

The most detailed published answer we found comes from Recommendation ITU-R BS.1116-3, which sets the average reverberation time of a reference listening room at Tm = 0.25 × (V ÷ 100 m³)^(1/3) seconds. For home-sized rooms that is roughly 0.2 to 0.3 seconds, averaged from 200 Hz to 4 kHz.

Reverberation time, or RT60, is the time it takes sound in a room to decay by 60 dB after the source stops. BS.1116 uses the cube root of volume, so a room twice the size is allowed only about 26 percent more reverberation.

Working the formula for a real room

Take a hypothetical room 20 by 14 ft with a 9 ft ceiling. Its volume is 2,520 cu ft, or 71.4 m³ (one cubic foot is 0.0283 m³). Then Tm = 0.25 × (71.4 ÷ 100)^(1/3) = 0.25 × 0.894 = 0.22 seconds.

BS.1116 also sets tolerances around Tm. From 200 Hz to 4 kHz the measured value should stay within 0.05 seconds above or below Tm. Below 200 Hz more is allowed above Tm, rising to 0.3 seconds extra at 63 Hz, and from 4 to 8 kHz the band widens to 0.1 seconds either way.

What else the reference room asks for

Reverberation is only one line. The same section of BS.1116 also asks for these conditions:

  • Early reflections: reflections from the room’s surfaces that arrive within 15 ms of the direct sound should be at least 10 dB below it, in the 1 to 8 kHz range.
  • No anomalies: flutter echoes and tonal colorations are to be avoided.
  • Quiet: background noise at seated ear height preferably no higher than the NR 10 curve, and never above NR 15.
  • Shape: the room symmetrical about the center line between the front speakers, with a floor area of 20 to 60 m² for stereo and 30 to 70 m² for multichannel playback.
  • Proportions: 1.1 w/h ≤ l/h ≤ 4.5 w/h − 4, with l/h and w/h both under 3, to spread the room’s low-frequency resonances.
  • Speaker clearance: free-standing loudspeakers at least 1 m from surrounding reflecting surfaces, or early reflections controlled some other way.
Room (L × W × H, ft)VolumeBS.1116 reference TmFloor area vs 30 to 70 m² (multichannel)Proportion rule
12 × 12 × 8, spare bedroom1,152 cu ft (32.6 m³)0.17 s13.4 m², belowFails (square plan)
16 × 13 × 8, small media room1,664 cu ft (47.1 m³)0.19 s19.3 m², belowMeets
20 × 14 × 9, dedicated theater2,520 cu ft (71.4 m³)0.22 s26.0 m², belowMeets
24 × 18 × 9, living room3,888 cu ft (110.1 m³)0.26 s40.1 m², withinMeets
28 × 20 × 10, great room5,600 cu ft (158.6 m³)0.29 s52.0 m², withinMeets
Calculated from the formulas in Recommendation ITU-R BS.1116-3, sections 8.2.2 and 8.2.3, checked November 2026. Room sizes are hypothetical examples, not measurements.

What BS.1116 is, and what it is not

BS.1116 is written for laboratories that run listening tests with expert listeners to detect very small impairments in audio systems, such as codec artifacts. Its own scope says it is meant for impairments “so small as to be undetectable without rigorous control of the experimental conditions”. It is not written for homes.

It is still the clearest published answer to “how dry is dry”, and it carries one lesson that is easy to miss. The tolerance runs both ways: a reference room should not be more than 0.05 seconds below Tm in the main band. Even this demanding specification does not ask for a room as dead as possible.

For contrast, rooms built for talking are specified much wetter. The legacy WELL v1 standard set a maximum RT60 of 0.6 seconds for conference rooms and 0.5 seconds for open offices (WELL v1, Feature 78). A reference listening room is less than half as reverberant as that conference room limit.

Treating a dedicated theater around the speaker layout

In a dedicated theater, the speaker layout tells you where the panels go. Fix the seats and speakers first, then treat the surfaces that send early reflections to the main seat, symmetrically on both sides.

Start from the speaker layout

Dolby’s home theater installation guidelines place the front left and right speakers about 22 to 30 degrees either side of the center line. In a 7.1 layout, side surrounds sit at 90 to 110 degrees and rear surrounds at 135 to 150 degrees. Overhead speakers in a 7.1.4 reference layout sit at 45 degrees of elevation from the seat, adjustable from 30 to 55 degrees.

Height matters for panel placement. Dolby asks for all listener-level speakers at the same height, “typically 3.9 feet (1.2 meters)”, which it describes as ear level for the average seated listener. Center the first-reflection panels on that height, so a 4 ft tall panel spans roughly 2 to 6 ft above the floor.

BS.1116 asks for a room symmetrical about the center line, and the same logic applies to panels. Put the main seat on the room’s center line and install panels in mirrored pairs, so the left and right channels meet the same surfaces.

Find the side-wall first reflection points

A first reflection point is the spot on a wall, floor or ceiling where sound from a speaker bounces once on its way to a listener. On side walls they are easy to find with a mirror.

  1. Sit in the main seat with your head at normal height.
  2. Have a helper slide a hand mirror flat along the left side wall at about ear height.
  3. Mark the wall wherever you can see the front left speaker in the mirror. Repeat for the center and front right speakers.
  4. Do the same on the right side wall, and for the surrounds if they face across the room.
  5. Size the panel zone to cover all the marks with a margin of about a foot each way.
Plan of a 20 by 14 ft theater with first reflection zonesPlan view of a rectangular room with the screen wall on the left. Front left, center and right speakers sit near the screen wall, surrounds sit on the side walls just behind the seat, and the seat is on the center line 11 feet from the screen wall. Dashed lines show sound from the front left and right speakers bouncing off each side wall to the seat. Shaded zones mark side-wall panels from about 3 to 8.5 feet from the screen wall, a rear-wall panel zone, a ceiling zone between the speakers and the seat, and corner treatment. LCR SLSR Seat Ceiling zone Screen Rear wall Side wall, 20 ft 14 ft Side-wall first-reflection zones (3 to 8.5 ft from screen) and rear wall Corners: deepest absorbers, for bass Paths from L and R to the seat via the side walls Ceiling zone: absorb here unless speakers bounce sound off the ceiling
Drawn to scale for a hypothetical 20 by 14 ft room with the seat 11 ft from the screen wall. Speaker angles follow Dolby's home theater installation guidelines (December 2018); reflection points calculated by the mirror-image method. Planning illustration, not a measured room.

How much absorption a first reflection point needs

The BS.1116 early-reflection condition gives a way to judge how serious a reflection is. Sound travels about 1.125 ft per millisecond, so 15 ms is about 17 ft of extra path; in a home-sized room, nearly every first reflection arrives inside that window.

In the plan above, the front left speaker is 10.39 ft from the seat, and its bounce off the left wall travels 12.59 ft. The extra 2.2 ft means a delay of about 2 ms, and spreading over the longer path makes it only 20 × log10(12.59 ÷ 10.39) = 1.7 dB quieter.

Reflection off the left wall Point, ft from screen wall Extra path Delay Weaker by distance Absorption needed for 10 dB
Front left speaker 3.8 2.2 ft 2.0 ms 1.7 dB about 0.85
Center speaker 6.3 7.4 ft 6.6 ms 5.0 dB about 0.68
Front right speaker 7.7 10.8 ft 9.6 ms 6.2 dB about 0.58

The last column is the share of sound energy the wall would have to absorb to make up the rest of the 10 dB. For the front left speaker, the remaining 8.3 dB means only 10^(−0.83) = 0.15 of the energy may reflect, so the panel must absorb about 0.85 in the 1 to 8 kHz range.

These figures ignore the speaker’s directivity, and real speakers send less sound sideways than forward. BS.1116 asks its reference monitors for a directivity index between 6 and 12 dB, so the real requirement is usually lower. The point stands: first-reflection panels need high coefficients at 1,000 to 4,000 Hz, and a thin decorative face may not have them, so ask for those bands from the ASTM C423 report.

Surround speakers and the floor

Side surrounds at 90 to 110 degrees hang on or near the side walls, close to the seats. Their reflections off the opposite side wall and the rear wall arrive soon after the direct sound, so the rear half of each side wall is a reasonable second panel zone once the first reflection zones are done. The example later in this article puts 32 sq ft there.

The floor also has a first reflection point between each front speaker and the seat, exactly halfway along the path when the speaker and the listener’s ears are at the same height. Carpet on pad covers it in the theater example below, and a large rug covers it in a living room. The mirror method works on the floor too, with the mirror laid flat.

Front wall, rear wall and the seats nearest it

The front wall sits behind the speakers. BS.1116 asks for free-standing speakers at least 1 m (about 3.3 ft) from reflecting surfaces, and where that is impossible, for early reflections to be controlled some other way. Where the speakers sit closer than that, as the front left and right do in the plan above at about 2 ft from the screen wall, panels on the wall behind and beside them are that “other way”.

The rear wall matters most when seats are close to it. In the plan above, the seat is 9 ft from the back wall, and the center speaker’s reflection off it arrives 16 ms late and 9.2 dB down, just outside the window. Move a second row to within 3 ft of the back wall, and the same reflection arrives 5.3 ms late and only 2.8 dB down. Treat the rear wall behind any row within a few feet of it.

Ceiling: absorb it, unless your speakers bounce off it

Dolby’s guidance has two cases. With overhead speakers, it recommends sound-absorbing and sound-diffusing treatment for reflections from the walls, floor and ceiling. With upward-firing “Dolby Atmos enabled” speakers, which bounce height effects off the ceiling, it asks for a flat, reflective ceiling 7.5 to 14 ft high and says the first reflection from the ceiling “is desired”.

So check the speaker plan before you hang a ceiling cloud. Dolby even advises replacing acoustic ceiling tiles at the reflection point of an upward-firing speaker with foam-core board or another reflective material. A cloud between the front speakers and the seats suits a room with in-ceiling or no height speakers, and fights a room built around upward-firing ones.

Corners, bass and what panels cannot reach

Bass behaves differently from the rest of the range, and porous panels of normal depth do little about it. In a room, the lowest resonances fall where half a wavelength fits between two parallel surfaces: frequency = 1,125 ÷ (2 × distance in feet).

For the 20 by 14 ft room with a 9 ft ceiling, that gives 1,125 ÷ 40 = 28 Hz, 1,125 ÷ 28 = 40 Hz and 1,125 ÷ 18 = 62.5 Hz. A quarter wavelength at 62.5 Hz is 4.5 ft, and the quarter-wave rule in our air gap calculator suggests how far from a wall a porous absorber has to reach to work there.

Published data shows the gap. A slat panel on 1 in furring with PET felt fill, about 1.8 in deep, measured 0.29 at 125 Hz in an accredited test, and 0.06 at 63 Hz in the lab’s non-accredited extended data. Thicker panels and deeper air spaces do better, which is the subject of our guide to panel thickness and air gaps.

That is why theater bass work starts with geometry and setup. A deep absorber straddling a corner leaves a triangular air space behind it, deepest at the corner, which is the depth the quarter-wave rule asks for. Beyond that, seat placement, subwoofer placement and calibration do the heavy lifting: Dolby’s guidelines call for correct bass management settings and for level, delay and EQ calibration of Dolby Atmos systems.

If you are choosing which room to convert, check proportions first. A 12 by 12 by 8 ft bedroom fails the BS.1116 proportion rule, because its length and width are equal, while a 16 by 13 by 8 ft room passes.

Put the panel plan on an elevation

For integrators and designers, a theater plan is easiest to check as wall elevations rather than a list. Draw each wall at the same scale, then mark these items.

  1. Speaker centers and the seated ear height of 3.9 ft.
  2. The mirror-method reflection points for each front speaker and each row of seats.
  3. Panel outlines with sizes, mounting depth and the test report behind each panel type.
  4. Outlets, switches, sconces, vents, door swings and the screen frame.
  5. Ceiling items: height speakers, sprinklers, lights and any cloud, with its suspension points.

A drawing like that shows clashes before anything is ordered, and it shows the owner how much of each wall the plan uses.

Treating a living room that also hosts movie nights

In a living room, put a few panels where heads and speakers are closest to hard surfaces, and let rugs, curtains and furniture do the rest. The aim is clearer dialogue and less ring, not a reference room.

Many living rooms break the theater rules from the start. The sofa is against a wall, one side is glass, the TV sits in a built-in or over a fireplace, and the room opens onto a kitchen. Each of those changes where the first few panels should go.

Count what is already there

Before adding panels, list what the room already has: a rug, curtains, upholstered seating, full shelves. In the living room example later in this article, the 8 by 10 ft rug contributes 32 sabins at 500 Hz, slightly more than the two 4 by 5 ft art panels behind the sofa (30 sabins). Every soft thing you would buy anyway is a panel you may not need.

Start where heads are closest to a hard wall

The single most useful living-room panel is often the one behind the sofa. If heads are 1 ft from the back wall, the center speaker’s reflection off that wall arrives, in the plan above, just 1.8 ms after the direct sound and only 0.9 dB weaker. No other surface in the room is that close to the listener’s ears.

A large printed art panel behind the sofa does that job and hangs like a canvas. A 4 by 5 ft panel, or a pair, covers the zone behind three seats.

Then the side wall that is solid

Find the first reflection points with the mirror method above, on whichever side wall is solid. A pair of fabric-wrapped wall panels in the wall color, centered at about 3.9 ft, almost disappears.

Do not try to mirror the glass side with panels. Lined curtains hung in folds over the glass at the reflection points add absorption exactly there, and they open in the daytime.

When one side is open to the kitchen

An open side has no nearby wall, so it sends no early side reflection to the seats. That is an asymmetry, but not one to fix with panels on the other side; treat the solid side’s reflection points and let the open side stay open.

The open side matters more for the whole floor than for the films. Sound from the speakers spreads into the kitchen and dining area, and their hard surfaces return it later. That is the open-plan problem, and our open-plan echo guide covers it.

Fireplaces, built-ins and the TV wall

When the TV wall holds the speakers or a soundbar, its surfaces sit close to them. Two fabric-wrapped panels either side of the TV, or a wood slat wall mounted over a filled cavity, steady the front of the room. Keep in mind that the same slat panel laid flat on drywall measured only 0.28 at 500 Hz in published lab data.

Around a fireplace, keep panels outside the clearances set by the fireplace maker and the local code. A wall of full bookshelves is not a bare, flat surface; count it in the estimate before deciding that wall needs a panel at all.

If your speakers or soundbar fire upward

Dolby’s ceiling guidance applies in living rooms too. If your speakers or soundbar use upward-firing drivers (check the manual), keep the ceiling between them and the seats hard and flat, and put any cloud elsewhere.

Dolby also asks for Dolby Atmos enabled speakers to sit at least 3 ft (0.9 m) from listening positions, ideally 5 ft (1.5 m) or more. In a small living room, that can decide where the sofa goes before any panel is placed.

Why a living room should not be treated like a theater

A living room treated to theater standards would need more panel area than it has wall, and it would lose its other job. The arithmetic and the standard itself both point the same way.

The arithmetic

Take the hypothetical living room from the table above: 24 by 18 ft, 9 ft ceiling, 3,888 cu ft. Its BS.1116 reference value is 0.26 seconds, and the fictional example below estimates it at 1.16 seconds as furnished.

To reach 0.26 seconds by Sabine’s formula, RT60 = 0.049 × V ÷ A, the room would need 190.5 ÷ 0.258 = about 738 sabins, against the 164 it has. With panels that add a net 0.75 sabins per sq ft, that is about 765 sq ft of panel, and the room has only 636 sq ft of wall once the glass is excluded.

Each panel does less than the last

Sabine’s formula also shows diminishing returns, because reverberation time falls with one over total absorption. In the living room, the first 84 sabins of treatment take it from 1.16 to 0.77 seconds. The next 85 sabins take it only to about 0.57 seconds, half the gain for the same spend and wall space.

The room’s other job

A living room is also where people talk. Rooms built for conversation are specified well above playback reference values; WELL v1 capped conference rooms at 0.6 seconds, more than twice the BS.1116 value for this room. There is no published standard for a shared family room, so the target is a planning choice.

Our view is that a living room used for both lands sensibly in the middle: noticeably drier than the untreated room, still lively enough for conversation, and treated where the early reflections are worst. In the example below, that means about 0.8 seconds with six panels and a pair of curtains.

Two worked examples: a theater and a living room

The two examples use the same method: list the surfaces, multiply area by coefficient, add up the sabins and apply Sabine’s formula. The coefficients are planning assumptions at 500 Hz, not test results, and the panels are generic, not a Fibson product.

Example (fictional): a dedicated theater. Not a Fibson project. A 20 by 14 ft room with a 9 ft drywall ceiling, carpet on pad and four upholstered recliners, set up as 5.1.2 with in-ceiling height speakers. Volume 2,520 cu ft; 0.049 × 2,520 = 123.5.

Surface or group Area (sq ft) Coefficient (net where replacing drywall) Sabins
Ceiling, drywall 280 0.05 14.0
Walls, drywall 612 0.05 30.6
Floor, carpet on pad 280 0.30 84.0
Recliners (allowance) 20.0
Untreated total 148.6
Wall panels: front 48, side first reflections 64, rear sides 32, rear wall 48 192 0.80 replacing 0.05, net 0.75 144.0
Corner absorbers straddling four corners 48 0.90 43.2
Ceiling cloud between the front speakers and seats, 4 by 8 ft 32 0.90 28.8
Treated total 364.6

Untreated: RT60 = 123.5 ÷ 148.6 = 0.83 seconds. Treated: RT60 = 123.5 ÷ 364.6 = 0.34 seconds, with panels on 39 percent of the wall area. The BS.1116 reference for this volume is 0.22 seconds, which by Sabine would take about another 188 sabins. At this level of treatment a measured decay is a better guide than the formula, and the cloud is only right because the height speakers are in the ceiling.

Example (fictional): a living room with movie nights. Not a Fibson project. A 24 by 18 ft room with a 9 ft drywall ceiling, an oak floor with an 8 by 10 ft rug, 120 sq ft of sliding glass on one long wall, a sofa against the opposite wall and a TV with a soundbar. Volume 3,888 cu ft; 0.049 × 3,888 = 190.5.

Surface or group Area (sq ft) Coefficient (net where replacing) Sabins
Floor, oak (outside the rug) 352 0.07 24.6
Rug on oak 80 0.40 32.0
Ceiling, drywall 432 0.05 21.6
Walls, drywall 636 0.05 31.8
Sliding glass 120 0.12 14.4
Sofa, chairs and shelves (allowance) 40.0
Untreated total 164.4
Lined curtains in folds at the glass reflection points 80 0.50 replacing glass, net 0.38 30.4
Two fabric panels, 2 by 4 ft, on the solid side wall 16 net 0.75 12.0
Two printed art panels, 4 by 5 ft, behind the sofa 40 net 0.75 30.0
Two fabric panels, 2 by 4 ft, either side of the TV 16 net 0.75 12.0
Treated total 248.8

Untreated: RT60 = 190.5 ÷ 164.4 = 1.16 seconds. Treated: RT60 = 190.5 ÷ 248.8 = 0.77 seconds, with six panels and one pair of curtains. Theater-style treatment of 192 sq ft of wall panels plus four corner absorbers would reach about 0.54 seconds, and the BS.1116 value of 0.26 seconds would need more panel than the room has wall. The 0.8 second level is a planning choice for a shared room; no code sets one for homes.

Choosing panels for each room

The panel types overlap, but the priorities differ. A theater buys absorption per square foot and depth; a living room buys absorption that looks like it belongs.

Need Dedicated theater Living room
First reflection points Thick fabric-wrapped panels with high 1 to 4 kHz values Fabric panels in the wall color, or curtains on glass
Behind the seats Fabric-wrapped panels across the rear wall One or two printed art panels behind the sofa
Front wall Dark fabric panels behind and beside the speakers Panels or a filled-cavity slat wall around the TV
Ceiling A cloud, if no speakers bounce off the ceiling Usually nothing
Bass Deep corner absorbers, then placement and calibration Placement and calibration
Look Dark, quiet, uniform Art, color and wood, as part of the decor

Read the band table, not just NRC, for every panel. First-reflection panels need high values at 1,000 to 4,000 Hz; anything sold as bass treatment needs a test that shows 125 Hz and below. Depth and air gap change those numbers, and our air gap calculator shows the rule of thumb.

Panels absorb sound inside the room. They do not soundproof it, so a theater that disturbs a bedroom upstairs needs construction work on walls, ceilings and doors as well.

Measuring and checking the result

Sabine’s formula is an estimate; HyperPhysics describes it as a model that permits an approximate calculation. In a heavily treated theater especially, measure before and after rather than trusting the arithmetic alone.

The standard for that job is ISO 3382-2:2008, which specifies methods for measuring reverberation time in ordinary rooms, including the procedure, the equipment, the number of positions and the report. It was last reviewed and confirmed in 2022, according to a November 2026 archived copy of its catalog page.

Calibrate the system after the panels go up, because treatment changes what the receiver’s microphone hears. Dolby’s guidelines ask for each full-range speaker to be set to the same C-weighted level, 79 to 82 dB at the central seat with pink noise at -20 dBFS, and recommend combining autocalibration with a manual check.

Before any of that, record the room. Our room measurement worksheet lists what to measure, and the reverberation time calculator gives a first estimate from size and finishes.

Common mistakes in both rooms

The mistakes below are common in both rooms, and each one is visible in the data or the geometry before anything is installed.

Thin panels everywhere

Thin felt tiles absorb mostly high frequencies. A published specification sheet for a 12 mm polyester felt panel, for example, shows 0.02 at 250 Hz and 0.89 at 2,000 Hz when it is fixed flat. Cover a room in that and you remove reverberation above 1,000 Hz far faster than below 500 Hz, so the balance of the room tilts toward the low end. Mix in thicker panels, or mount thin ones over an air space.

Panels on one side only

BS.1116 asks for a symmetrical room so that the left and right channels meet the same surfaces. A panel on the left wall without its twin on the right breaks that. Plan pairs from the start, even if one of the pair has to be a curtain in a living room.

A cloud in the wrong place

A ceiling cloud is a good panel in the wrong room if upward-firing speakers bounce height effects off that same patch of ceiling. Check the speaker plan, then decide.

Treating the living room by the theater rulebook

Six well-placed panels and a pair of curtains did most of the work in the living room example. Theater-style coverage would take far more panels, use wall space the room needs for windows, art and shelves, and still leave the bass where it was.

Skipping the band table

An NRC on a product page says nothing about 125 Hz or 4,000 Hz. For first reflection points, read 1,000 to 4,000 Hz; for bass claims, look for 125 Hz and below, and check the mounting used in the test.

Checklists: dedicated theater or living room

Use the list that matches the room’s main job. If the room is both, start with the living room list and stop when dialogue is clear.

Dedicated theater

  1. Fix the screen, seats and speaker angles first, using the speaker maker’s or Dolby’s layout.
  2. Put the main seat on the center line and plan panels in mirrored pairs.
  3. Mark side-wall first reflection points with a mirror, and center panels on 3.9 ft.
  4. Treat the front wall behind and beside the speakers, and the rear wall behind any row near it.
  5. Add a ceiling cloud only if no speakers bounce sound off the ceiling.
  6. Put the deepest absorbers across the corners, then place seats and subwoofers and calibrate.
  7. Estimate with Sabine, then measure; aim toward, not past, the BS.1116 reference value.

Living room

  1. Note where heads are: a sofa against a wall makes that wall the first panel.
  2. Treat the solid side wall’s reflection points; use curtains on glass.
  3. Add one panel either side of the TV if the speakers sit close to that wall.
  4. Keep the ceiling clear if anything fires upward.
  5. Count the rug, curtains and furniture before adding more.
  6. Stop when dialogue is clear and the room still feels comfortable for conversation.

Fibson Acoustics designs and makes acoustic panels to order for homes, offices and restaurants, and plans each room before anything is ordered. Our homes page shows how panels fit into living spaces, and acoustic design explains how a room plan sets a target and places panels. To start one for your theater or living room, send us the room size and a photo of each wall.

Working on a room like this?

Send the size, a few photos and what happens in the space. We reply with questions or an outline of the panel plan.

Plan my room