Fibson homePlan my room
Menu

Why your open-plan home echoes, and how to fix it without a studio look

Open concept living room echo comes from volume and hard finishes. What reduces it, in order: rugs and upholstery, the ceiling and upper walls, then panels.

A saffron felt ball caught mid-bounce above a wide herringbone felt floor, with a thick round olive rug waiting in the far corner.
Reader question
Our open-plan living, kitchen and stair area echoes. What actually reduces it, and where do panels fit alongside rugs and furniture?

An open-concept living room echoes because one large volume of air is wrapped in hard surfaces: wood or tile floors, drywall, glass, stone counters and often a tall ceiling. Reverberation time rises with a room’s volume and falls with the absorption inside it, so a big room with little soft material rings for longer. Add absorption in proportion to the room’s size, in this order: rugs, curtains and upholstered furniture first, then the ceiling and upper walls where open-plan homes have the most free surface, then decorative panels where furniture cannot reach.

This article explains why that order works and how much absorption a large room actually needs, with a worked estimate you can adapt. It covers the general “why does my room echo” problem and the three hardest parts of an open-plan home: the kitchen, the double-height room and the stairwell. It is written for homeowners, renters and the designers and builders who work with them.

What causes open concept living room echo

Echo in an open-plan home is mostly reverberation: sound reflecting from surface to surface and dying away slowly. Two things set how slowly: the volume of the space and the total absorption of everything in it.

Wallace Clement Sabine worked this out after Harvard asked him, in 1895, to fix the acoustics of the lecture room in its newly completed Fogg Art Museum. His collected papers show that the constant in his equation was “proportional to the volume of the room,” across a set of rooms in which “the largest room was nearly one hundred and fifty times larger than the smallest” (Sabine, Collected Papers on Acoustics, 1922). He counted absorption in “open-window units,” the same idea as today’s sabin: one square foot of surface that absorbs as much as one square foot of open window.

The modern form of his result is the Sabine formula. In feet, RT60 = 0.049 x V / A, where RT60 is the time for sound to fall by 60 dB, V is the room volume in cubic feet and A is the total absorption in sabins (HyperPhysics). As HyperPhysics puts it, “You won’t get a long reverberation time with a small room.”

Why modern homes ring

Open plan raises the volume by joining rooms together, and today’s finishes lower the absorption. Harvard Health’s 2024 guide to home acoustics names the pattern: home trends “favoring open floor plans, high ceilings, and sparse furnishings” can “make communication harder regardless of your hearing ability” (Harvard Health Publishing). The same article lists “hardwood floors, as well as cathedral ceilings and minimalist decor” among the features that “allow sound to reverberate.”

Most of those surfaces absorb almost nothing. HyperPhysics reproduces a textbook table of absorption coefficients (from Hall’s Musical Acoustics). A coefficient is the fraction of sound energy a surface absorbs, from 0 to 1. Here are the rows that matter most in a house, at 500 and 1,000 Hz, the mid frequencies used for the estimates in this article.

Surface (as listed in the table) 500 Hz 1,000 Hz
Gypsum wallboard, 1/2 in on studs 0.05 0.04
Heavy plate glass 0.04 0.03
Ordinary window glass 0.2 0.1
Concrete, poured 0.02 0.02
Brick 0.03 0.04
Vinyl tile on concrete 0.03 0.03
Heavy carpet on concrete 0.15 0.4
Heavy carpet on felt backing 0.4 0.5
Draperies, medium velour 0.5 0.7
Upholstered seating, unoccupied 0.6 0.7

The table has no entry for a stone countertop or a sealed wood floor on a subfloor; treat both as hard surfaces when you estimate. The gap between the top and bottom of this table is the whole story of open-plan echo. A wall of drywall absorbs about 5 percent of the sound that reaches it; a velour drapery absorbs half or more.

Echo, reverberation and flutter: what you are hearing

People use “echo” for three different effects, and each points to a slightly different fix.

  • Reverberation is the overall ring of the room: speech blurs, the television sounds muddy and conversations at the island compete with the sofa. It is the main subject of this article.
  • Flutter echo is a fast buzzing repeat between two parallel hard surfaces. Shure’s guide to boardroom acoustics describes it as what happens when “two reflective surfaces within a room are parallel,” with sound bouncing “back-and-forth” (Shure, archived copy). Tall stairwells and narrow double-height halls are prime spots.
  • A distinct echo is a separate, delayed repeat of a sound. It needs a long reflection path, such as a very long or very tall space, so it is less common at home than the other two.

Why it gets worse when people gather

An empty room and a full room are different problems. With several conversations at once, each one adds to the reverberant sound the others must talk over. The project page from a panel maker describing a two-story living room in California put it in the owner’s terms: “With multiple conversations happening during gatherings, the room’s acoustics created unwanted echoes and muddled sound quality” (manufacturer’s project page).

Harvard Health’s guide adds the hearing angle. “If you already have hearing loss, this reverberation may hamper your ability to quickly process sounds,” and “hearing aids don’t necessarily solve this problem, since they amplify all sounds.” If anyone in the household has hearing loss, the case for treating a ringing room is stronger.

A five-minute diagnosis

Before you buy anything, find out which problem you have and where it lives. You need nothing more than your hands, your ears and a tape measure.

  1. Clap once where people talk, at the island, the table and the sofa. A smooth fading ring is reverberation. A fast buzzing repeat is flutter between two parallel hard surfaces; turn your head to find which pair.
  2. Look at the floor. Estimate what share of it is covered by rugs, and whether those rugs sit on pads.
  3. Look at the glass. Note which windows and doors have no curtains, or only blinds.
  4. Look up. Note the ceiling height and shape, and how much of it is free over the table and the island.
  5. Listen on a busy evening. If the trouble is mostly at dinner with guests, it is reverberation building up. If it is a neighbor, traffic or the dishwasher, it is noise, which is a different job.
What you notice Likely cause Where to start
Voices blur across the room; the TV sounds muddy Reverberation from a large, hard volume Rugs and curtains, then the ceiling over the main zones
A buzzing ring in the stairwell or a narrow tall hall Flutter between parallel walls Treat one wall of each facing pair, high up
Dinner gets louder and louder as guests arrive Reverberation plus many talkers Ceiling clouds over the table, then wall panels nearby
The kitchen is hard to talk in even when quiet Hard kitchen finishes and appliance noise Ceiling over the island, upholstered stools, quieter appliances
You can hear the neighbors or the street Sound coming through the building Not an absorption problem; see the last section

How much absorption a large room needs

Because reverberation time is volume divided by absorption, halving it means doubling the total absorption in the room. In a large open-plan space, that is a lot of material, usually more than rugs and a sofa can supply on their own.

The worked example below follows one fictional room through five steps. The coefficients are planning assumptions in the range of the textbook values above, not test results for any product.

Example (fictional). Not a Fibson project. An open-plan kitchen, dining and living room, 34 by 24 ft with a flat 13 ft painted drywall ceiling, an engineered wood floor, painted walls and cabinet fronts, and 240 sq ft of windows and sliding doors. Volume: 34 x 24 x 13 = 10,608 cu ft. The mid-frequency coefficients are planning assumptions, not test results.

Surface Area (sq ft) Coefficient Sabins
Floor, engineered wood 816 0.07 57.12
Ceiling, painted drywall 816 0.05 40.80
Walls and cabinet fronts (1,508 sq ft less the glass) 1,268 0.05 63.40
Windows and sliding doors 240 0.12 28.80
Sofa, chairs, dining set and stools (allowance) 80.00
Total 270.12

Now: RT60 = 0.049 x 10,608 / 270.12 = 519.79 / 270.12 = 1.92 seconds.

Step 1, rugs: a 9 by 12 ft rug in the living area and an 8 by 10 ft rug under the dining table, both on pads. That is 188 sq ft at an assumed 0.35 replacing wood at 0.07, a net 0.28, adding 52.64 sabins. Total 322.76; RT60 = 519.79 / 322.76 = 1.61 seconds.

Step 2, curtains: lined curtains hung in deep folds beside the glass, 120 sq ft at an assumed 0.50 replacing painted wall at 0.05, a net 0.45, adding 54.00. Total 376.76; RT60 = 519.79 / 376.76 = 1.38 seconds.

Step 3, ceiling clouds: four 4 by 6 ft clouds hung about 2 ft below the ceiling over the dining table and the island, 96 sq ft at an assumed 0.90 for a suspended panel, adding 86.40. Total 463.16; RT60 = 519.79 / 463.16 = 1.12 seconds.

Step 4, upper walls: four 3 by 6 ft fabric-wrapped panels above 8 ft on the longest wall, 72 sq ft at an assumed 0.80 replacing drywall, a net 0.75, adding 54.00. Total 517.16; RT60 = 519.79 / 517.16 = 1.01 seconds.

Step 5, art: two 4 by 5 ft printed art panels at eye level over the sofa and the sideboard, 40 sq ft at a net 0.75, adding 30.00. Total 547.16; RT60 = 519.79 / 547.16 = 0.95 seconds.

Estimated reverberation time of a fictional open-plan room after each stepBar chart of a fictional 34 by 24 ft open-plan room with a 13 ft ceiling. Estimated RT60: now 1.92 seconds; after rugs 1.61; after curtains 1.38; after ceiling clouds 1.12; after upper-wall panels 1.01; after printed art panels 0.95. A dashed line marks the 1.0 second planning target.Estimated RT60 in seconds, each step added to the one before0.51.52.001.01.92Now1.61Rugs1.38Curtains1.12Clouds1.01Upper walls0.95Art panelsCharcoal: before. Rose clay: furnishings. Olive: ceiling and upper walls.Saffron: art panels. Dashed line: 1.0 s planning target.
Fictional example data for illustration, not a Fibson project. Sabine estimates (RT60 = 0.049 x V / A) for a 34 by 24 by 13 ft room; coefficients are planning assumptions, not test results. The 1.0 s target is a planning choice.

What the example shows

The rugs and curtains in steps 1 and 2 are things many households buy anyway, and together they take about half a second off. That is a real, audible change. But they stop at 1.38 seconds, because there is only so much floor to cover and only so much glass to dress.

Reaching about 1 second needs roughly double the starting absorption: 519.8 sabins against 270.1. The ceiling and upper walls supply most of the rest because they are the largest surfaces nobody is using. The art panels finish the job and give the room a reason to look designed rather than treated.

Quantity first, then position

For the room’s overall ring, how much absorption you add matters more than exactly where it goes. In the Fogg lecture room, Sabine hung 50 meters of cretonne cloth in different sections under the ceiling and found it “reduced the audible duration of the residual sound by very nearly the same amount, regardless of the section in which it hung.” He concluded that an absorbent’s effect was, “under ordinary circumstances, nearly independent of its position.”

Position still matters for two things. It decides whether the flutter between two parallel walls gets broken up, and it decides what people hear in the first moments of a conversation at the table or the island. So size the job by the total, then place the material where people talk and where hard parallel walls face each other.

Choosing a target for a home

No code sets a reverberation time for a living room, so any target is a planning choice. The example uses about 1 second. For reference, LEED v4.1 lists under 0.6 seconds for a hotel “individual room or suite” and under 0.8 seconds for a hotel “meeting or banquet room,” measured at 500, 1,000 and 2,000 Hz (USGBC, LEED v4.1 BD+C, Table 2). A large shared space at home sits somewhere between those uses.

A target well under 1 second in a big room needs a great deal of absorption, and a room with almost no reverberation has its own problem. Shure’s boardroom guide warns that if reverberant sound “is taken away entirely, it can lead to rooms that sound unnatural or ‘dead’.” A clear improvement you can hear matters more than a particular number.

Start with rugs, curtains and upholstered furniture

Soft furnishings come first because you may want them anyway, they are easy to change and every square foot counts toward the total. Choose the heavier, thicker version of each, and put them where people talk.

Harvard Health’s guide lists carpeting and area rugs, wainscoting or paneling, wall photos, paintings or tapestries, curtains or draperies, bookcases, upholstered furniture and throw pillows among the items that absorb sound in a home. Its practical tips are specific:

  • Floors. “Wall-to-wall works more effectively in these circumstances than area rugs, some of which can also pose falling risks. If you do opt for area rugs, use nonslip rug pads to help keep them in place.”
  • Furniture. “Additional pieces, especially upholstered ones, absorb sound better than hard-surfaced, all-wood or all-metal choices.”
  • Window treatments. “Heavy draperies promote hearing more effectively than thin curtains or shades. Even adding tablecloths can help.”
  • Dividers. Room dividers “can put a stop to reverberating sounds in large spaces.”

Why the rug pad matters

The textbook table shows how much the backing changes a soft floor. Heavy carpet on concrete is listed at 0.15 at 500 Hz; heavy carpet on felt backing is listed at 0.4. A rug laid straight on a hard floor is likely to behave more like the first row, and a rug on a thick felt pad more like the second.

So buy the pad, buy the larger size, and put rugs where people sit and talk: under the sofa group, under the dining table and along a long hard path between zones. One large rug adds more absorbing area than several small ones, and it looks calmer.

Curtains, upholstery and the rest

Item What makes it work Practical notes
Lined curtains Weight, lining and deep folds; velour drapery is listed at 0.5 at 500 Hz Hang them wider than the glass so they stack on wall rather than over the view
Upholstered sofa and chairs Thick padding and fabric; unoccupied upholstered seating is listed at 0.6 at 500 Hz Swap a hard bench or metal stools for upholstered ones where you can
Bookcases Listed by Harvard Health among absorbing items Full shelves; glass doors turn them back into a hard surface
Throw pillows, tablecloths, tapestries Small areas of soft material Helpful at the margins; they will not move a large room on their own
Room divider screens Interrupt sound between zones Fabric-covered screens absorb as well; glass ones only reflect

The weakness of soft furnishings in an open-plan home is geometry. They sit low, in the bottom 3 ft of a room that may be 10 to 20 ft tall, and they compete with the walkways, the kitchen and the view.

Use the ceiling and upper walls, the largest free surfaces

In an open-plan home, the ceiling and the walls above door height are usually the largest surfaces with nothing on them. They do not compete with furniture, windows or cabinets, and in tall rooms they make up a large share of all the hard surface.

Section through a tall open-plan room showing where free surface isCross-section of a room with a 13 ft ceiling. The bottom band, floor to about 3 ft, holds a rug, a sofa and a dining table. The middle band, about 3 to 8 ft, holds windows, cabinets, a television and art. The top band above 8 ft and the ceiling are mostly free surface, where a ceiling cloud hangs over the dining table and a fabric-wrapped panel sits high on the wall.8 ft3 ft13 ftUpper walls and ceilingMostly free surfaceEye level: windows, cabinets, artArt panels where a picture would hangCeiling cloudUpper-wallpanelArt panelRugs andupholsterySection through a fictional room with a 13 ft ceiling (not to exact scale)
Fictional room for illustration, not to exact scale. Bands show where furniture usually sits and where wall and ceiling surface is usually free; the placements match the worked example above.

Ceiling clouds over tables and islands

A ceiling cloud is a panel hung horizontally below the ceiling, so sound can reach it from above and below. It fits naturally over the places where people gather: the dining table, the kitchen island, a reading area. In the example, four clouds added more absorption than either the rugs or the curtains.

A few practical rules keep clouds safe and calm-looking:

  • Hang from framing, not from drywall alone, with hardware rated for the load.
  • Keep clear of pendant lights, recessed fixtures, ceiling fans, smoke alarms and any sprinkler heads.
  • Keep walkways clear overhead. The 2010 ADA Standards, written for public and commercial buildings, require vertical clearance of “80 inches (2030 mm) high minimum” (section 307.4) (US Access Board). It is a sensible guide at home too.
  • Match the color to the ceiling if you want them to recede, or to an accent color if you want them read as a feature.

Panels high on tall walls

On a double-height wall, the band above 8 ft is often blank. Fabric-wrapped panels there, in the wall color, read as part of the architecture and treat the tall reflective surfaces that also cause flutter. Align them with windows, beams or the stair line so they look planned.

Kitchens: the hardest part of an open-plan home

Kitchens are hard by necessity: stone or quartz counters, tile, cabinet fronts, glass and stainless steel, plus machines that make noise. You cannot cover those surfaces, so absorb around them and keep the noise sources in check.

Harvard Health’s guide quotes an otolaryngologist on why the kitchen is the hardest place to talk. With the fan on over the stove, the microwave running and the fridge always on, “it can be pretty tough to hear that, because the noise volume drowns out the signal. That’s what always makes the kitchen a tough place to hear.”

Where absorption can go in and around a kitchen

  • The ceiling over the island, with a cloud or two, clear of pendants and the range hood.
  • The wall facing the kitchen from the living or dining side, where a panel catches the sound the kitchen sends into the room.
  • Upholstered counter stools in place of hard ones.
  • A runner with a nonslip pad on the working aisle, if it suits the floor and the household.
  • Not near the range or the backsplash, where grease and steam settle on any soft surface.

What absorption will not do in a kitchen

Panels and rugs reduce the ring of the room. They do not make a range hood, a dishwasher or a blender quieter at the source. If the hood drowns out conversation at its normal setting, look at the hood itself; that is a product choice, not a treatment.

Stairwells, two-story entries and double-height rooms

Tall spaces combine a large volume with tall, parallel hard walls, so they ring longer and often flutter. Treat the upper walls and the ceiling or landing above, where furniture never reaches.

The panel maker’s two-story project page gives a real starting point: the installer “measured an initial RT60 of 1.4 seconds” in the living room, and the team designed a plan “that would reduce the RT by approximately 45% in the mid and high-frequency ranges.” The page reports no measured result after treatment.

The Sabine relationship shows what such a target means. Cutting reverberation time by 45 percent leaves 55 percent of it, which needs 1 / 0.55, about 1.82 times, the original total absorption: roughly 82 percent more absorption than the room started with. If that 45 percent applied to the 1.4 second figure, the aim would be about 0.8 seconds.

Tall spaces with small footprints respond quickly to treatment, because their volume is modest even when they feel huge. The example below shows why a few panels high on the walls can change a two-story entry so much.

Example (fictional). Not a Fibson project. A two-story entry hall, 12 by 14 ft and 18 ft tall, with a tile floor, painted drywall walls and ceiling, a front door and windows totaling 80 sq ft, and an open stair. Volume: 12 x 14 x 18 = 3,024 cu ft. The coefficients are planning assumptions, not test results.

Floor, tile: 168 sq ft x 0.03 = 5.04 sabins. Ceiling: 168 x 0.05 = 8.40. Walls (936 sq ft less 80 of door and glass): 856 x 0.05 = 42.80. Door and windows: 80 x 0.12 = 9.60. Stair and console table (allowance): 5.00. Total 70.84 sabins.

Now: RT60 = 0.049 x 3,024 / 70.84 = 148.18 / 70.84 = 2.09 seconds.

Step 1: four 3 by 6 ft fabric-wrapped panels high on the two longer facing walls, two per wall, 72 sq ft at a net 0.75, adding 54.00. Total 124.84; RT60 = 148.18 / 124.84 = 1.19 seconds. Treating both walls of the facing pair also breaks up the flutter between them.

Step 2: a 6 by 9 ft rug on a pad, 54 sq ft at an assumed 0.35 replacing tile at 0.03, a net 0.32, adding 17.28. Total 142.12; RT60 = 148.18 / 142.12 = 1.04 seconds.

Stairwells and entries

A stairwell is a tall, narrow shaft with hard walls on every side, which makes flutter likely. To check, stand on the landing and clap once. A fast buzzing repeat means two parallel walls need breaking up.

  • Treat one of each pair of parallel walls high up, where nobody brushes against it.
  • Use the ceiling or underside of the landing above the stair, if it is reachable for installation.
  • Keep panels shallow where people pass. The ADA Standards limit objects with leading edges more than 27 in and not more than 80 in above the floor to “4 inches (100 mm) maximum” of protrusion into a circulation path (section 307.2). Written for public buildings, it is a good rule beside a stair.
  • A runner on the treads adds absorption, but only if it is fixed securely enough to be safe underfoot.

Double-height living rooms

In a living room open to a gallery or a second floor, the upper half of the room is free surface. Clouds may be impractical at that height, so high wall panels and treatment on the gallery’s underside do the work. Art panels at eye level add to it.

Decorative panels where furniture cannot help

Panels finish what furniture starts, on walls where a picture or a feature finish would go anyway. To keep a home from looking like a studio, use fewer, larger panels, place them where art would hang or where the architecture suggests, and choose a finish that belongs in the room.

Panel type Where it fits in a home What to know
Printed art panels Over the sofa, the sideboard, the dining table The print fabric must let sound through to the core; see our guide to acoustic art panels
Wood slat panels on felt A TV wall or a feature wall Absorption depends on the felt and any cavity behind the slats; see our guide to wood slat acoustic panels
Felt panels, tiles and shapes Halls, kids’ rooms, stairwells Patterns read as design; check the frequency table for thin products
Fabric-wrapped panels Upper walls, matched to the wall color Almost disappear when the fabric matches the wall
Ceiling clouds Over tables and islands Matched to the ceiling or used as a feature

How to keep it from looking like treatment

  • Go bigger and fewer. Two large art panels look like art; twelve small squares look like equipment.
  • Follow the architecture. Line panels up with window heads, door frames, beams or the stair stringer.
  • Match or contrast on purpose. Wall-colored fabric disappears; an accent color reads as a choice.
  • Keep edges clean. Square, crisp edges read as furniture; soft foam edges read as a studio.
  • Avoid convoluted foam. Egg-crate textures signal “recording room” in a way flat panels do not.

If you rent

Renters can still do most of the work. Rugs with pads, lined curtains on rods that fit existing brackets, upholstered furniture, full bookcases and fabric room dividers all move with you. For panels, ask the supplier about mounting that comes off with minimal patching, check your lease, and favor a few large art panels hung like pictures over many small fixings. Ceiling clouds need fixings into the ceiling framing, so they usually need the landlord’s agreement.

Ask for the data behind any panel

Whatever you choose, the absorption figure should come from a lab test. ASTM C423 measures sound absorption in a reverberation room “by measuring decay rate” (ASTM C423-23). The accredited lab Intertek summarizes its main rating: NRC is “the average of the absorption coefficients at 250, 500, 1000 and 2000 hertz, rounded to the nearest multiple .05,” and the ASTM E795 practice provides “the mounting technique” (Intertek).

A data sheet that names the mounting and shows the full frequency table tells you far more than a single NRC. C423 itself says its coefficients “should be used with caution” in real rooms, because practical areas are larger than test specimens and “the sound field is rarely diffuse.”

If you are building or renovating

The cheapest time to plan for echo is before the finishes go in. A builder or designer can make the same open plan far calmer by treating absorption as part of the finish schedule rather than as an afterthought.

  • Run the estimate at design stage. List every finish with its area and run a Sabine estimate for the main open-plan volume, the same way as the example above. If the estimate is well over your target, plan where the missing sabins will come from before drywall goes up.
  • Consider absorptive finishes for large surfaces. The HyperPhysics table lists acoustical plaster at 0.5 at 500 Hz and 0.6 at 1,000 Hz, against 0.05 and 0.04 for gypsum wallboard. A ceiling or upper wall in an absorptive finish can do the work of many panels without looking like treatment.
  • Add blocking in the ceiling framing wherever clouds, pendants or a future panel may hang, and note it on the drawings.
  • Avoid long, bare parallel walls in stairwells and narrow double-height halls, or plan to treat one side of each pair.
  • Keep a feature wall free near the sofa or the table where large art panels can go, clear of outlets, switches and thermostats.
  • Specify soft floors where they make sense: carpet on stairs and in bedrooms, and room in the furniture plan for large rugs in the living and dining zones.
  • Choose quieter appliances and a quieter range hood, since absorption cannot quiet a machine at the source.

A finish list for each room feeds the same Sabine estimate, so you can compare a plaster ceiling, a slatted wall or a set of clouds on paper before anything is ordered.

What panels, rugs and curtains will not fix

Absorption reduces echo inside a room. It does not stop sound traveling through the building, and it does little for deep bass.

  • A neighbor’s noise through a shared wall, or footsteps from upstairs. That is sound transmission, a blocking job that needs mass, sealing and isolation. The US General Services Administration calls its approach the “ABC’s” of noise control, which stand for Absorb, Block and Cover (GSA, Sound Matters); panels are only the first. Our guide to NRC vs STC explains why panels are not soundproofing.
  • Booming bass from a television or subwoofer. Many absorbers do much less at low frequencies; the HyperPhysics table lists rigid-mounted acoustic tile at 0.2 at 125 Hz, against 0.7 at 500 Hz. If the living room doubles as a cinema, our guide to home theater acoustic panels covers playback rooms.
  • Appliance and HVAC noise. Absorption lowers the room’s reflections of that noise, not the noise the machine makes.

Estimate first, then check by ear

A quick estimate tells you how far your room is from where you want it and how much absorption that gap represents. A before-and-after listening check, or a measurement, tells you whether the changes worked.

Make the estimate

  1. Measure the room: length, width and ceiling height, and the area of each wall, window and glass door.
  2. List every surface and its finish: floor, ceiling, walls, glass, cabinets. The surface finish worksheet gives you a form.
  3. Run the numbers with the reverberation time calculator, which applies the Sabine formula to your list.
  4. Work out the gap: divide 0.049 x volume by your target time to get the total sabins you need, then subtract what you have.
  5. Fill the gap in order: rugs and curtains, then ceiling and upper walls, then panels.

Check the result

Record a short clip on your phone from the sofa before and after, with the same speech and the same position, and compare them on headphones. If you want a number, phone apps can estimate RT60; our guide to measuring reverberation time explains how far to trust them. The formal method is ISO 3382-2:2008, which “specifies methods for the measurement of reverberation time in ordinary rooms” (ISO).

Remember that Sabine is an estimate. HyperPhysics notes that the formula “is not to be taken as an exact relationship,” and real rooms with furniture, openings and odd shapes will differ from the arithmetic.

A short checklist for an open-plan home

  • Where do people talk: the island, the dining table, the sofa?
  • What is the ceiling height and shape: flat, sloped, vaulted or double-height?
  • Which large surfaces are free: ceiling over tables, upper walls, the stair shaft?
  • What soft furnishings could be bigger, heavier or padded?
  • Which parallel hard walls flutter when you clap?
  • Is the real problem echo inside the room, or noise from outside it?

Fibson Acoustics designs and makes acoustic panels to order and plans each room before anything is ordered. The homes page shows how that plan works for living rooms, kitchens and stairwells, and a room acoustic assessment turns your measurements and photos into a written estimate. If you also work from home, see our guide to home office acoustics. When you are ready, you can send us the room with a photo of each wall and the ceiling.

Working on a room like this?

Send the size, a few photos and what happens in the space. We reply with questions or an outline of the panel plan.

Plan my room