Fibson homePlan my room
Menu

Home office acoustics: why you sound hollow on calls and what to fix first

Home office acoustics in the right order: move the mic closer, treat the wall you face, the side walls and ceiling, then the wall your camera shows.

A saffron felt boomerang curving back toward a small olive armchair in a box-shaped felt room seen from above, its shadow falling on a rose clay rug.
Reader question
Why do I sound hollow on video calls from my home office, and which surfaces should I treat first?

You sound hollow on video calls because your microphone hears two things at nearly the same level: your voice, and your voice coming back off the walls, desk, window and ceiling a few milliseconds later. Fix it in this order: shorten the distance from your mouth to the microphone, then treat the surfaces that bounce your voice straight back into it (the wall behind your screen, the side walls beside the desk and the ceiling above it), then the wall behind you that the camera shows. Check each step with a test recording, not a hand clap.

This guide to home office acoustics explains why that order works, how much treatment a small room really needs, and how to judge the result yourself. It is written for people who call, teach, coach or record from a spare bedroom, a corner of the living room or a converted closet. If your problem is a conference room with ceiling microphones and several talkers, our guide to meeting room echo on video calls covers that case.

Why you sound hollow on calls when the room sounds fine to you

The room may sound fine to you because you hear it with two ears, from where you sit, and you are used to it. The people on the call hear one microphone signal from one point in the room, and that point is often farther from your mouth than you think.

Shure’s guide to boardroom acoustics describes sound in a room as three parts: direct sound, early reflections and reverberation. Direct sound travels in a straight line from your mouth to the microphone. Early reflections are copies of your voice that bounce off nearby surfaces and arrive within about 50 milliseconds; the same guide notes they are “almost indistinguishable from the original sound source.” Later reflections pile up into the reverberant sound of the room.

When there are too many of them, the same guide warns, the reverberant sound “can smear or cloud consonants, making it harder to distinguish between words.” Shure’s current guidance on remote participants puts it plainly: “Sound bounces off hard surfaces before it reaches the microphone,” creating reverberation “that makes speech hollow and difficult to follow” (Shure, November 2026). Its older guide to corporate sound adds the key condition: intelligibility “requires direct sound, spoken word in this case, to overpower both unwanted ambience (HVAC, projector noise, etc.) and reflected sound (room reverberation)” (Shure, 2016, archived copy).

So there are two levers. You can make the direct sound stronger at the microphone, or you can make the reflections weaker. The first lever is a matter of distance and costs little. The second is a matter of absorption and placement, and that is where panels come in.

Hollow, echo, flutter or noise: name the problem first

Listeners use the word “echo” for several different things, and each has a different first fix. Use this table to sort out which one you have before buying anything.

What listeners say What is usually happening First thing to try
“You sound far away, boxy or like you’re in a bathroom” Early reflections and reverberation reaching the microphone almost as loudly as your voice Move the microphone closer, then treat the surfaces nearest the mouth-to-microphone path
“There’s a ringing or buzzing tail after you stop” Flutter echo between two parallel hard surfaces, such as a bare wall and a window opposite it Put absorption on one of the two parallel surfaces
“We can hear ourselves come back” Their voices leave your speakers and re-enter your microphone Wear headphones; calling systems use acoustic echo cancellation for this, but it has limits
“There’s a hum, a fan or traffic behind you” Background noise from equipment or from outside the room Move the microphone closer and the noise source farther away; panels do little here
“You keep fading in and out” Your mouth-to-microphone distance changes as you turn or lean back Fix the microphone position, or use a headset

Shure’s boardroom guide describes flutter echo as what happens when “two reflective surfaces within a room are parallel,” with sound bouncing “back-and-forth” between them. The same guide lists the usual suspects in meeting rooms: “Windows, glass partitions, tables, computer and tablet screens, hardwood floors and ceilings.” A home office has most of those, in a smaller box.

Move the microphone closer before you buy any panel

Halving the distance between your mouth and the microphone raises your voice at the microphone by about 6 dB, while the sound of the room stays where it was. It is the cheapest change you can make, and it works on reflections and background noise at the same time.

Shure’s application engineers state the rule directly: “Every time the distance between your mouth and the microphone doubles, you lose 6 dB of sound level at the mic. That’s the Inverse Square Law.” The same article notes that when you move away from the microphone, “the ambient noise stays the same” (Shure, 2008, archived copy). Reverse that and you have the fix: every halving of the distance buys you 6 dB of voice over the room.

Your voice at the microphone gains about 6 dB each time the distance halvesBar chart. Relative to a microphone 32 inches from the mouth, a microphone at 16 inches receives your voice about 6 dB louder, at 8 inches about 12 dB louder and at 4 inches about 18 dB louder. A dashed line shows the room's reverberant sound staying at the same level throughout.Voice level at the microphone, relative to 32 inYour voiceRoom's reverberant sound (unchanged)+6+12+180 dB32 in+6 dB16 in+12 dB8 in+18 dB4 inDistance from mouth to microphone
Illustration of a rule, not a measurement: about 6 dB per halving of distance (inverse square law), while the room's sound stays the same. The dashed line's height is illustrative and the 32 in starting point is hypothetical. Source: Shure, "Debunking common audio myths" (2008), Wayback Machine capture of September 10, 2025, checked November 2026.

What 6 dB per halving means at a real desk

Suppose your laptop sits at the back of the desk and its microphone is 32 in from your mouth. Here is what each setup change does to your voice at the microphone, using only the inverse square rule. The room does not change at all in this table.

Setup (hypothetical distances) Mouth to microphone Change in your voice level at the microphone
Laptop at the back of a deep desk 32 in Starting point
Laptop pulled to the front edge, or a webcam microphone on the monitor 16 in About 6 dB louder
USB desk microphone on a short stand in front of the keyboard 8 in About 12 dB louder
Microphone on a boom arm, or a lavalier clipped to your shirt 4 in About 18 dB louder
Headset microphone near the corner of your mouth 1 to 2 in More again, and constant as you turn your head

Because the room’s sound at the microphone stays roughly where it was, every one of those decibels improves the balance between your voice and the room. It also lets you or your software turn the input gain down, which lowers everything else the microphone picks up.

Shure’s corporate sound guide names the distance at which your voice and the room are equally loud at the microphone the critical distance: “the distance between the sound source and the microphone at which the direct sound (the talker) and ambient noise are at the same volume level.” It adds two points that apply directly at home. “For good intelligibility, it is key for talkers to be significantly closer to the microphone than the distance at which critical distance is achieved,” and “the more unwanted ambient sound in the room, the shorter the critical distance.”

In plain terms, a hard, bare room shrinks the zone in which a microphone sounds good. You can either move into that zone or enlarge it with absorption. Doing both is how you get from hollow to clear.

Choosing the microphone form factor

Shure’s guide ranks the options by how close they put the microphone: “For the greatest intelligibility, you want to get the mic as close to the talker’s mouth as possible. Headworn microphones are perfect for this task.” The next best alternative it gives is a lapel (lavalier) microphone, then tabletop and gooseneck microphones.

Two cautions keep this from going too far. First, very close placement changes your tone: “a mic held too close will boost the low frequencies. It’s called Proximity Effect,” as the myths article puts it. If you sound boomy after moving the microphone in, back it off slightly before you blame the room.

Second, the microphone has to stay put relative to your mouth. A desk microphone at 6 in becomes a microphone at 12 in the moment you lean back, and the room comes flooding back. A headset or lavalier moves with you, so the distance stays the same as you turn and lean.

Directional microphones and where they point

A directional microphone hears less of the room, but only from certain directions. Shure describes cardioid and supercardioid models as “most sensitive to sound from the front and least sensitive to sound from the rear,” and notes that, “properly aimed, unidirectional mics can help reduce ambient noise pickup of room reflections.”

That has a consequence for where you put panels. A directional microphone aimed at your mouth is also aimed past your head at the wall behind you. Its quiet side faces the wall behind your screen. So with a desk or boom microphone, the wall behind you matters more than it does with a laptop, and the wall in front of you matters a little less.

If your laptop’s documentation does not state a pickup pattern for its built-in microphone, assume it hears the room from every direction. Then the nearest hard surfaces in every direction count, starting with the wall you face.

Which surfaces send your voice back into the microphone

The surfaces that matter most are those closest to the short path between your mouth and the microphone: the wall you face, the side walls beside your head, the ceiling above the desk and the desk itself. A reflection from a nearby hard surface arrives early and strong. A reflection from across the room travels farther and arrives weaker.

Sound in air travels at about 344 m/s at 20°C, roughly 1,130 ft per second (HyperPhysics). A reflection that travels an extra 6 ft arrives only about 5 milliseconds after your direct voice. That is well inside the 50 millisecond window the boardroom guide gives for early reflections, so a close wall blends with your voice and colors it rather than sounding like a separate echo.

Here is the order we suggest for a typical desk that faces a wall. The numbers match the diagram below.

Plan of a small home office showing which surfaces to treat firstPlan view of a rectangular room. A desk sits against the top wall with a screen and a microphone, and the person sits facing that wall. Numbered labels mark the treatment order: 1, the wall behind the screen; 2 and 3, the side walls beside the desk at seated head height; 4, the ceiling directly above the desk and chair, shown as a dashed outline; 5, the wall behind the person, which the camera shows; 6, a rug under the chair. A rose clay line traces one reflection from the mouth to the wall behind the screen and back to the microphone.You1Wall behind the screen2Side wall3Side wallor window4Ceilingabove desk5Wall the camera shows6Rug under the chair
Fictional layout for illustration. Saffron bars mark suggested panel positions; the sky bar marks the backdrop panel; the rose clay line is one reflection path from mouth to wall to microphone. The order is editorial guidance based on path length, not a measurement.

1. The wall behind your screen

You face this wall and talk toward it, so it receives your voice first and sends it straight back toward you and the microphone. When the desk faces a wall, that wall may be only 3 ft or so from your mouth. Treat the area level with your mouth and slightly above it, centered on where you sit, with panels on either side of the monitor or one wide panel above it.

If that wall is a window, it is at least as reflective as drywall. The textbook table of absorption coefficients on HyperPhysics (from Hall’s Musical Acoustics) lists heavy plate glass at 0.04 at 500 Hz, against 0.05 for gypsum wallboard; both send back about 95 percent of the sound energy that hits them (HyperPhysics). A heavy, lined curtain that you can draw during calls is the practical answer, since you cannot hang a panel over glass you want to see through.

2 and 3. The side walls beside your head

Side walls send reflections sideways into the microphone, and in a corner desk setup one side wall may be within arm’s reach. Treat each side wall at seated head height, starting at the desk’s front edge and running back past your chair.

To find the exact spots, use a mirror. Sit in your normal position and have someone slide a hand mirror flat along the side wall. Wherever you can see the microphone in the mirror from your mouth’s position, that spot reflects your voice into it.

4. The ceiling above the desk

In a room with an 8 ft ceiling, the path from your mouth to the ceiling and back down to a desk microphone is short and strong. The ceiling is easy to forget because it is awkward to reach. A single panel fixed flat to the ceiling above the desk, or a small suspended ceiling cloud, closes that gap. Fix it into the ceiling framing, keep it clear of light fixtures and smoke alarms, and keep it out of the swing of any ceiling fan.

The desk itself

The boardroom guide lists tables among the main reflective surfaces, and a desk is a table you lean over. A laptop or desk microphone close to a bare desktop hears your voice bounce off it a fraction of a millisecond after the direct sound. A felt desk mat or a thick fabric desk pad between you and the microphone softens that reflection, and so does raising the microphone off the desk on a stand or arm.

The floor

A hard floor under the chair reflects your voice up into the room, and a hard plastic chair mat does the same. A rug under the chair helps, and it counts toward the room’s total absorption too. If you need a chair mat for the wheels, use the smallest one that works and put the rug around it.

Treat the wall behind you as backdrop and absorber at once

The wall behind you comes after the others in the order the microphone hears them, but it is the one surface your colleagues actually see. A printed art panel or a composition of felt panels there absorbs reflections that a directional microphone faces head on, and it gives the camera something better than a bare wall or a closet door.

Size the backdrop to the camera frame

Do not guess the camera frame. Open your camera app, sit in your normal position, and have someone mark the left and right edges of what the camera sees on the back wall with painter’s tape. That taped area is your backdrop.

Center the panel or group on your head, not on the wall. A panel that sits half out of frame looks like an accident. One that fills the upper two-thirds of the frame behind your head and shoulders reads as a deliberate background and still treats the part of the wall that matters acoustically.

What works on camera and acoustically

  • A printed art panel. A printed art panel carries an image you own or have licensed on fabric that lets sound through to the absorptive core. On camera it looks like a large canvas. Our guide to acoustic art panels explains what to check so the print does not undo the absorption.
  • A composition of felt panels. Felt panels, tiles and shapes can be arranged as a pattern in one or two colors. Keep the pattern calmer than your face; fine, high-contrast detail behind your head competes with you for attention.
  • A full bookcase. Harvard Health’s guide to home acoustics lists bookcases among the items that absorb sound in a home (Harvard Health Publishing, 2024). A bookcase with glass doors is just another sheet of glass.

What to avoid behind you

Framed prints behind glass or acrylic glazing reflect sound just like a window, and they catch the glare of a ring light. A large television or monitor on the back wall does the same. A glossy painted accent wall looks fine in person and reflects like any other painted wall.

The colors you choose also affect the picture. Choose matte finishes, which do not throw back the glare of a desk lamp or ring light, and colors a little darker than your face so that you stay the subject.

How much absorption a small home office needs

A small room needs only a modest area of panels to bring its estimated reverberation time down a long way, because its volume is small. Placement then decides how much of that improvement the microphone actually hears.

The standard estimate is Wallace Clement Sabine’s formula: reverberation time (RT60, the time for sound to fall by 60 dB) equals 0.049 times the room volume in cubic feet, divided by the total absorption in sabins (HyperPhysics). Sabine’s own papers counted absorption in “open-window units,” and a sabin is the same idea: one square foot of surface that absorbs as much as one square foot of open window (Sabine, Collected Papers on Acoustics, 1922). Each surface contributes its area times its absorption coefficient.

Example (fictional). Not a Fibson project. A spare-bedroom office, 11 by 10 ft with an 8 ft painted drywall ceiling, a wood floor and one 4 by 5 ft window. The desk faces the long wall opposite the door. Volume: 11 x 10 x 8 = 880 cu ft. The mid-frequency coefficients are planning assumptions, not test results.

Surface Area (sq ft) Coefficient Sabins
Floor, wood 110 0.07 7.7
Ceiling, painted drywall 110 0.05 5.5
Walls, painted drywall (336 sq ft less the window) 316 0.05 15.8
Window 20 0.12 2.4
Desk, chair and shelf (allowance) 5.0
Total 36.4

Now: RT60 = 0.049 x 880 / 36.4 = 43.12 / 36.4 = 1.18 seconds.

Step 1, first reflections: two 2 by 4 ft panels on the wall behind the screen and one 2 by 4 ft panel on each side wall at head height. That is 32 sq ft at an assumed 0.80 replacing drywall at 0.05, a net 0.75, adding 24.0 sabins. Total 60.4; RT60 = 43.12 / 60.4 = 0.71 seconds.

Step 2, ceiling: one 2 by 4 ft panel flat on the ceiling over the desk, 8 sq ft at a net 0.75, adding 6.0. Total 66.4; RT60 = 43.12 / 66.4 = 0.65 seconds.

Step 3, backdrop: one 3 by 5 ft printed art panel behind the chair, 15 sq ft at a net 0.75, adding 11.25. Total 77.65; RT60 = 43.12 / 77.65 = 0.56 seconds.

Step 4, floor: a 5 by 7 ft rug on a pad, 35 sq ft at an assumed 0.30 replacing wood at 0.07, a net 0.23, adding 8.05. Total 85.7; RT60 = 43.12 / 85.7 = 0.50 seconds.

Reference points, not targets

No code sets a reverberation time for a home office, so any target is a planning choice. Two published figures for rooms used for calls are useful as reference points. The legacy WELL v1 standard sets a maximum RT60 of 0.6 seconds for conference rooms (WELL v1, Feature 78). LEED v4.1 lists “teleconference room” at under 0.6 seconds, measured at 500, 1,000 and 2,000 Hz (USGBC, LEED v4.1 BD+C, Table 2). In the example, the estimate drops below that line at step 3.

Shure’s boardroom guide also offers a coverage rule of thumb: “covering approximately 20% of the surface area of a room is a good starting point for controlling the reverberant field.” The example room has 556 sq ft of floor, ceiling and walls, so 20 percent would be about 111 sq ft. The four steps above cover 55 sq ft with panels and 35 sq ft with a rug, about 90 sq ft in total. Placed at the first reflection points, that smaller area is likely to do more for the microphone than the same area spread evenly.

Why the number is only half the story

Sabine’s formula treats sound as evenly spread through the room, which real rooms only approximate. HyperPhysics notes that it “works reasonably well for medium sized auditoriums but is not to be taken as an exact relationship,” and that it “tends to overestimate the reverberation times for enclosures of high absorption coefficient.” ASTM C423, the lab method behind panel absorption data, warns that in practical use “the sound field is rarely diffuse” (ASTM C423-23 scope and significance).

In a small office, the early reflections near the microphone can matter as much as the average decay. Two rooms with the same estimated RT60 can sound very different on a call if one has panels at the first reflection points and the other has them on the far wall. Use the estimate to size the job and the placement order to spend it.

Thickness and the low end of your voice

Absorption coefficients change with frequency. HyperPhysics notes that “the absorption coefficient of a surface typically changes with frequency, so the reverberation time is likewise frequency dependent.” Its table shows the pattern: rigid-mounted acoustic tile is listed at 0.2 at 125 Hz, against 0.7 at 500 Hz and 0.8 at 1,000 Hz.

A 2022 MusicRadar review of one printed foam panel, about 6 cm deep and mounted flush, found it helped “tame higher frequencies” while “their broadband capabilities are somewhat limited by the depth and choice of filling material” (MusicRadar). If your voice sounds boomy rather than hollow, check proximity effect first, then look at thicker panels or an air gap behind them. The air gap calculator shows how a mounting gap shifts the frequencies a panel works on.

Test with a recording, not a hand clap

A hand clap tells you how the room sounds to your ears where you stand. A test recording tells you what your listeners actually receive. Record the same passage before and after each change, with the microphone and settings you use on calls, and compare them on headphones.

A ten-minute test procedure

  1. Fix the setup. Use the microphone, position and calling software settings you use every day. If your app has noise suppression, record once with your usual setting; it can hide or exaggerate room sound.
  2. Record 10 seconds of silence. Sit still with the microphone live. This is your noise floor.
  3. Read the same 30-second passage at your normal call voice. Use a passage with hard consonants and pauses; the pauses are where the room’s tail shows.
  4. Name the file with the date and the change, for example “before” or “step 1 side walls.”
  5. Make one change, then record again. Change one thing at a time so you know what helped.
  6. Listen on closed-back headphones, not laptop speakers, and switch between files at the same volume.
  7. Listen for three things: a hollow tail after words (reflections), hiss or hum in the silent part (noise), and level changes when you turn your head (distance).

Shure’s corporate guide recommends the human version of the same check: “At the beginning of your teleconference, check with distant participants to see if they can hear your location clearly. If the overall sound quality is hollow, muffled, or indistinct, unwanted sound is likely the problem.” A colleague who hears you every day is a better judge than you are.

What a clap is good for

A clap is a useful diagnostic for one thing: flutter echo. Clap once between two parallel bare walls and listen for a fast buzzing repeat. If you hear it, one of those two walls needs absorption, wherever the microphone is.

If you want a number

Phone apps that estimate RT60 exist, but they measure at one spot with one sound source. The formal method is ISO 3382-2:2008, which “specifies methods for the measurement of reverberation time in ordinary rooms,” including the procedure, apparatus and “required number of measurement positions” (ISO). ISO last reviewed and confirmed it in 2022. For a home office, the before and after recordings usually tell you more than a single figure.

Noise from outside the room is a different job

Panels absorb sound inside the room. They do little about a leaf blower, a neighbor’s television, a barking dog or a furnace that you hear through the walls, door and window. That is a blocking problem, and panels are not a soundproofing product.

The US General Services Administration calls its approach the “ABC’s” of noise control, which stand for Absorb, Block and Cover (GSA, Sound Matters). Panels are the “absorb” part. Blocking needs mass and airtight seals: a solid door, closed windows and fewer gaps around pipes and ducts. Harvard Health’s guide notes that door sweeps, besides blocking drafts, “have the benefit of diminishing sounds.” Covering means added background sound, which is rarely what you want on a call.

The closer microphone from the first fix helps here too, because it raises your voice relative to everything else. For a full explanation of why absorption ratings and wall ratings measure different things, see NRC vs STC.

Sounds that start inside the room

Some noise is yours. A desktop computer fan, a mechanical keyboard, a desk fan and an air purifier all sit within a few feet of the microphone. Move what you can to the far side of the desk or the floor, and point a directional microphone away from it. Panels will not quiet a fan, but distance and direction can help.

Choosing panels for a home office

For a home office, the practical candidates are felt panels, fabric-wrapped panels and printed art panels, mounted flat to the wall. Pick by where the panel goes and what it has to look like, then check that the supplier can show test data for what you are buying.

Panel type Good for Watch for
Felt panels, tiles and shapes Side walls, ceiling, patterned compositions on the back wall Ask for the frequency table, especially the 250 and 500 Hz bands
Fabric-wrapped wall panels The wall behind the screen and the side walls, where you want the largest absorption per panel A fabric color matched to the wall makes them almost disappear
Printed art panels The wall the camera shows The print fabric must let sound through; see our art panel guide
Ceiling panel or small cloud Over the desk in rooms with 8 to 9 ft ceilings Must be fixed to framing and kept clear of lights and alarms

Ask for the test data, and the mounting

Absorption data for panels comes from the ASTM C423 reverberation room test. The accredited lab Intertek summarizes the single-number ratings it produces: NRC is “the average of the absorption coefficients at 250, 500, 1000 and 2000 hertz, rounded to the nearest multiple .05,” and the test uses the ASTM E795 standard practice for “the mounting technique” (Intertek).

The mounting changes the result, so a useful data sheet names it. Ask for the full frequency table too, not only the NRC. A single number averages four bands, so it cannot tell you where a panel is weak.

Mounting at home

The right fixing depends on the wall. Drywall over studs, plaster on lath and masonry each need different hardware. If you rent, ask the supplier about mounting that can come off with minimal patching, and check your lease.

Keep panel depth in mind near doors and in tight rooms. A panel that sticks out 2 in beside a door frame catches shoulders and bags. For more on spacing and grouping panels across a wall, see our guide to acoustic panel placement.

Home offices that are not spare bedrooms

The same order applies in other rooms, but the surfaces change. Use these notes to adapt it.

  • A desk in the corner of a living room. The two walls of the corner are very close to your head, whatever the size of the room. Treat both walls at head height around the desk, and use the open room behind you as your backdrop. Our guide to echo in open-plan homes covers the rest of the room.
  • A converted closet. Very small rooms make boxy, close reflections from every side. A closet full of hanging clothes is a lot of soft fabric; an empty one is bare drywall on every side and needs panels on much of its wall area.
  • A bedroom office. The bed, curtains and any carpet already add absorption. Often the wall behind the screen and one side wall are all that remain.
  • A room with a sloped or vaulted ceiling. The sloped surface over the desk acts like a wall angled toward you. Treat the part of the slope nearest your head first.
  • A podcast corner with two people. Each person needs their own microphone close to the mouth. Treat the wall behind each talker, since each directional microphone aimed at its talker also faces the wall behind that talker.

If you also watch films or play music in the same room, the priorities change; our guide to home theater acoustic panels covers playback rooms.

A home office acoustics plan in eight steps

Work through these in order and stop when your test recordings sound clear. You may not need all eight.

  1. Record a “before” file with your usual setup, using the procedure above.
  2. Move the microphone closer. A headset, lavalier or a desk microphone on an arm, aimed at your mouth. Record again.
  3. Treat the wall behind the screen at mouth height, or draw a heavy curtain if it is a window.
  4. Treat both side walls at seated head height, using the mirror test to find the spots.
  5. Treat the ceiling above the desk with one flat panel or a small cloud.
  6. Make the wall behind you the backdrop, sized to the camera frame, with a printed art panel or felt composition.
  7. Add a rug under the chair and a felt mat on the desk between you and the microphone.
  8. Record an “after” file and ask a colleague for an honest opinion on the next call.

To estimate your own room, the room measurement worksheet lists what to measure and photograph, and the reverberation time calculator turns it into a first Sabine estimate. Fibson Acoustics designs and makes acoustic panels to order and plans each room before anything is ordered; the home offices page shows how that works for a room like yours. If you would like a written plan for your room, you can send us the room with a photo of each wall and of your desk.

Working on a room like this?

Send the size, a few photos and what happens in the space. We reply with questions or an outline of the panel plan.

Plan my room